3851000 Exhaust pipe Volvo.Penta
4.3GLMMDA; 4.3GLPMDA; 4.3GSPMDA, 4.3GLPHUB; 4.3GSPHUB; 4.3GSPHUS, 4.3GLPLKD; 4.3GLPLKE; 4.3GSPLKD, 4.3GLPNCA; 4.3GLPNCB; 4.3GLPNCS, 5.0FIPHUBCE; 5.0FIPHUCCE; 5.0FIPHUECE, 5.0FiPMDA; 5.0FiPMDM; 5.8FiPMDA, 5.0FIPNCACE; 5.0FIPNCBCE; 5.0FIPNCMCE, 5.0FLPM
Exhaust
Price: query
Rating:
You can buy parts:
As an associate, we earn commssions on qualifying purchases through the links below
WIDIA TDM0810UPM TOP Drill M1 Modular Drill Insert, 0.631"/16.03mm, 140 deg, UP Geometry, Right Hand Cut, Carbide, TiAlN Coating, W25 Seat Size
WIDIA Universal Point (UP) geometry designed for versatility and productivity || Easy insert change, no screws or clamps required || Disposable insert eliminates reconditioning costs
WIDIA Universal Point (UP) geometry designed for versatility and productivity || Easy insert change, no screws or clamps required || Disposable insert eliminates reconditioning costs
Number on catalog scheme: 12
Compatible models:
4.3GLMMDA; 4.3GLPMDA; 4.3GSPMDA
4.3GLPHUB; 4.3GSPHUB; 4.3GSPHUS
4.3GLPLKD; 4.3GLPLKE; 4.3GSPLKD
4.3GLPNCA; 4.3GLPNCB; 4.3GLPNCS
5.0FIPHUBCE; 5.0FIPHUCCE; 5.0FIPHUECE
5.0FiPMDA; 5.0FiPMDM; 5.8FiPMDA
5.0FIPNCACE; 5.0FIPNCBCE; 5.0FIPNCMCE
5.0FLPMDA; 5.8FLPMDA
5.7GiPHUS
5.7GLPLKA; 5.7GLPLKD; 5.7GLPLKE
5.7GLPMDA; 5.7GIPMDA; 5.7GIPMDACE
5.7GLPNCS; 5.7GIPNCACE; 5.7GIPNCSCE
5.8FIPNCACE; 5.8FIPNCBCE; 5.8FIPNCMCE
7.4GIPBYCCE; 7.4GIPBYDCE; 7.4GSIPBYCCE
7.4GiPEFS; 7.4GSiPEFS; 8.2GSiPEFS
7.4GIPWTR; 7.4GSIPWTR; 8.2GSIPWTR
7.4GLPHUS; 7.4GIPHUSCE; 7.4GSIXHUS
7.4GLPLKD; 7.4GLPLKE; 7.4GIPLKDCE
7.4GLPMDA; 7.4GLPMDM; 8.2GLPMDA
7.4GLPNCA; 7.4GLPNCS; 7.4GLPNCM
8.1Gi-A; 8.1Gi-B; 8.1Gi-BF
Volvo.Penta
Volvo Penta entire parts catalog list:
- Exhaust » 3851000
4.3GLPLKD; 4.3GLPLKE; 4.3GSPLKD; 4.3GSPLKE; 4.3GIPLKDCE; 4.3GIPLKECE; 4.3GSJLKD
4.3GLPNCA; 4.3GLPNCB; 4.3GLPNCS; 4.3GSJNCC; 4.3GSJNCS; 4.3GSPNCA; 4.3GSPNCB; 4.3GSPNCM; 4.3GSPNCS; 4.3GIPNCACE; 4.3GIPNCBCE; 4.3GIPNCMCE; 4.
5.0FIPHUBCE; 5.0FIPHUCCE; 5.0FIPHUECE; 5.0FIPHURCE; 5.0FIPHUSCE; 5.0FLPHUB; 5.0FLPHUC; 5.0FLPHUE; 5.0FLPHUR; 5.0FLPHUS; 5.8FIIHUBCE; 5.8FII
- Intake Manifold, Exhaust & Cooling
- Intake Manifold, Exhaust & Cooling
- Exhaust and Cooling
- Exhaust and Cooling Water Pipe
5.0FIPNCACE; 5.0FIPNCBCE; 5.0FIPNCMCE; 5.0FIPNCSCE; 5.0FLPNCA; 5.0FLPNCB; 5.0FLPNCM; 5.0FLPNCS
- Exhaust and Cooling
- Exhaust and Cooling
- Intake Manifold, Exhaust & Cooling
- Intake Manifold, Exhaust & Cooling
- Exhaust and Cooling Water Pipe
- Intake Manifold, Exhaust & Cooling
- Intake Manifold, Exhaust & Cooling
- Exhaust and Cooling Water Pipe
5.7GLPLKA; 5.7GLPLKD; 5.7GLPLKE; 5.7GLPLKR; 5.7GSPLKD; 5.7GSPLKE; 5.7GLIPLKDCE; 5.7GIPLKDCE; 5.7GIPLKECE; 5.7GSICPLKD; 5.7GSiPLKD; 5.7GSIPL
5.7GLPMDA; 5.7GIPMDA; 5.7GIPMDACE; 5.7GLIMDA; 5.7GIIMDA
5.7GLPNCS; 5.7GIPNCACE; 5.7GIPNCSCE; 5.7GIPNCMCE; 5.7GIPNCBCE; 5.7GIINCCCE; 5.8FSIINCS
5.8FIPNCACE; 5.8FIPNCBCE; 5.8FIPNCMCE; 5.8FIPNCSCE; 5.8FLINCC; 5.8FLINCS; 5.8FLPNCA; 5.8FLPNCB; 5.8FLPNCM; 5.8FLPNCS; 5.8FSIINCC; 5.8FSIINC
- Exhaust and Cooling
- Exhaust and Cooling
- Intake Manifold, Exhaust & Cooling
- Intake Manifold, Exhaust & Cooling
- Exhaust and Cooling Water Pipe
7.4GiPEFS; 7.4GSiPEFS; 8.2GSiPEFS; DPX385XEFS; DPX415XEFS
7.4GIPWTR; 7.4GSIPWTR; 8.2GSIPWTR; DPX385XWTR; DPX415XWTR
7.4GLPHUS; 7.4GIPHUSCE; 7.4GSIXHUS; 7.4GLIHUB; 7.4GIIHUBCE
7.4GLPLKD; 7.4GLPLKE; 7.4GIPLKDCE; 7.4GIPLKECE; DPX385XLKE; DPX415XLKE
7.4GLPMDA; 7.4GLPMDM; 8.2GLPMDA; 8.2GLPMDM; 7.4GLIMDA; 7.4GLIMDM; 8.2GLIMDA; 8.2GLIMDM
7.4GLPNCA; 7.4GLPNCS; 7.4GLPNCM; 7.4GLPNCB; 7.4GIINCCCE; 7.4GIINCSCE; 7.4GIPNCACE; 7.4GIPNCBCE; 7.4GIPNCMCE; 7.4GIPNCSCE; 7.4GLINCC; 7.4GLI
8.1Gi-A; 8.1Gi-B; 8.1Gi-BF; 8.1Gi-C; 8.1Gi-CF; 8.1Gi-D; 8.1Gi-DF; 8.1GSi-A; 8.1GXi-A; 8.1GXi-AF; 8.1GXi-B; 8.1GXi-BF; 8.1GXi-C; 8.1GXi-CF; 8.1
Information:
Recommended Actions
Do not crank the engine continuously for more than 30 seconds. Allow the starting motor to cool for two minutes before cranking the engine again.
Note: The procedures have been listed in order of probability. Complete the procedures in order.Note: If the problem only occurs under certain conditions, test the engine under those conditions. Examples of certain conditions are high engine speed, full load, and engine operating temperature. Troubleshooting the symptoms under other conditions can give misleading results.
Table 1
Troubleshooting Test Steps Values Results
1. Diagnostic Codes
Note: Certain diagnostic codes and/or event codes may cause poor performance. Refer to in the electronic service tool.
A. Use the electronic service tool to check for active or logged codes.
B. Use the electronic service tool to check the histogram information if the engine has been derated.
Note: If the histograms contain engine derates and no diagnostic codes are present, then the engine is operating normally.
Engine Derate or Diagnostic Codes
Result: A diagnostic code is present.
Repair: Troubleshoot the code and then reset the histogram.
Result: A diagnostic code is not present.
Proceed to Test Step 2.
2. Parameters in the Electronic Control Module (ECM)
A. Use the electronic service tool to verify that the correct parameters are being used. Refer to Troubleshooting, "Configuration Parameters" for additional information.
Parameters
Result: The parameters are not correct.
Repair: Input the correct parameters. Refer to Troubleshooting, "Configuration Parameters" for additional information.
Result: The parameters are correct.
Proceed to Test Step 3.
3. Throttle Signal
A. Monitor the status for "Throttle Position" on the electronic service tool. Verify that the status for "Throttle Position" is stable and that the engine is able to reach high idle speed.
Throttle signal
Result: The throttle signal is stable.
Proceed to Test Step 4.
Result: The throttle signal is not stable.
Repair: Make the necessary repairs, Refer to the appropriate circuit test for the type of speed control that is installed.
4. Air Intake and Exhaust System
A. Observe the check engine lamp. Check for an air filter restriction indicator, if equipped. Replace a plugged air filters. Refer to the Operation and Maintenance Manual.
B. Check the air inlet and exhaust system for restrictions and/or leaks.
Restrictions
Result: There are restrictions in the air inlet or exhaust system.
Repair: Make the necessary repairs, Refer to Systems Operation/Testing and Adjusting, "Air Inlet and Exhaust System - Inspect" for additional information.
Result: There are no restrictions in the air inlet or exhaust system.
For engines with a single turbocharger, proceed to Test Step 5.
For engines with two turbochargers, proceed to Test Step 6.
5. Turbocharger
This Test Step is applicable to engines with a single turbocharger.
Note: The turbocharger that is installed on the engine is a nonserviceable item. If any mechanical fault exists, then the faulty turbocharger must be replaced.
A. Ensure that the mounting bolts for the turbocharger are tight.
B. Check that the oil drain for the turbocharger is not blocked or restricted.
C. Check that the compressor housing for the turbocharger is free of dirt and debris. Make sure that the housing is not damaged.
D. Check that the turbine housing for the turbocharger is free of dirt and debris. Make sure that the housing is not damaged.
E. Check that the turbine blades rotate freely in the turbocharger.
F. Ensure that the wastegate on the turbocharger is adjusted correctly. Refer to Systems Operation, Testing, and Adjusting, "Turbocharger - Inspect". If the wastegate actuator is faulty, replace the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Remove" and Disassembly and Assembly, "Turbocharger - Install".
Turbocharger
Result: There is a fault on the turbocharger.
Repair: Repair the turbocharger or replace the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Remove" and Disassembly and Assembly, "Turbocharger - Install".
Result: The turbocharger
Do not crank the engine continuously for more than 30 seconds. Allow the starting motor to cool for two minutes before cranking the engine again.
Note: The procedures have been listed in order of probability. Complete the procedures in order.Note: If the problem only occurs under certain conditions, test the engine under those conditions. Examples of certain conditions are high engine speed, full load, and engine operating temperature. Troubleshooting the symptoms under other conditions can give misleading results.
Table 1
Troubleshooting Test Steps Values Results
1. Diagnostic Codes
Note: Certain diagnostic codes and/or event codes may cause poor performance. Refer to in the electronic service tool.
A. Use the electronic service tool to check for active or logged codes.
B. Use the electronic service tool to check the histogram information if the engine has been derated.
Note: If the histograms contain engine derates and no diagnostic codes are present, then the engine is operating normally.
Engine Derate or Diagnostic Codes
Result: A diagnostic code is present.
Repair: Troubleshoot the code and then reset the histogram.
Result: A diagnostic code is not present.
Proceed to Test Step 2.
2. Parameters in the Electronic Control Module (ECM)
A. Use the electronic service tool to verify that the correct parameters are being used. Refer to Troubleshooting, "Configuration Parameters" for additional information.
Parameters
Result: The parameters are not correct.
Repair: Input the correct parameters. Refer to Troubleshooting, "Configuration Parameters" for additional information.
Result: The parameters are correct.
Proceed to Test Step 3.
3. Throttle Signal
A. Monitor the status for "Throttle Position" on the electronic service tool. Verify that the status for "Throttle Position" is stable and that the engine is able to reach high idle speed.
Throttle signal
Result: The throttle signal is stable.
Proceed to Test Step 4.
Result: The throttle signal is not stable.
Repair: Make the necessary repairs, Refer to the appropriate circuit test for the type of speed control that is installed.
4. Air Intake and Exhaust System
A. Observe the check engine lamp. Check for an air filter restriction indicator, if equipped. Replace a plugged air filters. Refer to the Operation and Maintenance Manual.
B. Check the air inlet and exhaust system for restrictions and/or leaks.
Restrictions
Result: There are restrictions in the air inlet or exhaust system.
Repair: Make the necessary repairs, Refer to Systems Operation/Testing and Adjusting, "Air Inlet and Exhaust System - Inspect" for additional information.
Result: There are no restrictions in the air inlet or exhaust system.
For engines with a single turbocharger, proceed to Test Step 5.
For engines with two turbochargers, proceed to Test Step 6.
5. Turbocharger
This Test Step is applicable to engines with a single turbocharger.
Note: The turbocharger that is installed on the engine is a nonserviceable item. If any mechanical fault exists, then the faulty turbocharger must be replaced.
A. Ensure that the mounting bolts for the turbocharger are tight.
B. Check that the oil drain for the turbocharger is not blocked or restricted.
C. Check that the compressor housing for the turbocharger is free of dirt and debris. Make sure that the housing is not damaged.
D. Check that the turbine housing for the turbocharger is free of dirt and debris. Make sure that the housing is not damaged.
E. Check that the turbine blades rotate freely in the turbocharger.
F. Ensure that the wastegate on the turbocharger is adjusted correctly. Refer to Systems Operation, Testing, and Adjusting, "Turbocharger - Inspect". If the wastegate actuator is faulty, replace the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Remove" and Disassembly and Assembly, "Turbocharger - Install".
Turbocharger
Result: There is a fault on the turbocharger.
Repair: Repair the turbocharger or replace the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Remove" and Disassembly and Assembly, "Turbocharger - Install".
Result: The turbocharger
Parts exhaust Volvo Penta:
3863061
3863061 Exhaust pipe kit
4.3GL-A; 4.3GL-B; 4.3GL-C, 4.3GL-E; 4.3GL-EF, 4.3GL-G; 4.3GL-GF, 4.3GL-J; 4.3GL-JF, 4.3GL-P, 4.3GXi-225-R; 4.3Gi-200-R, 4.3GXi-C; 4.3GXi-CF; 4.3GXi-D, 4.3GXi-E; 4.3GXi-EF; 4.3OSi-E, 4.3GXi-F; 4.3GXi-FF; 4.3OSi-F, 4.3GXi-G; 4.3GXi-GF; 4.3OSi-G, 4.3GXi
3858873
3858873 Exhaust pipe
4.3GL-A; 4.3GL-B; 4.3GL-C, 4.3GL-E; 4.3GL-EF, 4.3GLPEFS; 4.3GiPEFS, 4.3GLPWTC; 4.3GLPWTR; 4.3GSPWTC, 4.3GXi-A, 4.3GXi-B; 4.3GXi-BF; 4.3OSi-B, 4.3GXi-C; 4.3GXi-CF; 4.3GXi-D, 4.3GXi-E; 4.3GXi-EF; 4.3OSi-E, 4.3GXi-F; 4.3GXi-FF; 4.3OSi-F, 5.0GL-F; 5.0GL-
3852347
3852347 Exhaust manifold, exhaust
5.0FIPHUBCE; 5.0FIPHUCCE; 5.0FIPHUECE, 5.0FiPMDA; 5.0FiPMDM; 5.8FiPMDA, 5.0FIPNCACE; 5.0FIPNCBCE; 5.0FIPNCMCE, 5.0FLPMDA; 5.8FLPMDA, 5.8FIPNCACE; 5.8FIPNCBCE; 5.8FIPNCMCE
3855271
3855271 Exhaust pipe, port
5.0FIPHUBCE; 5.0FIPHUCCE; 5.0FIPHUECE, 5.0FIPNCACE; 5.0FIPNCBCE; 5.0FIPNCMCE, 5.8FIPNCACE; 5.8FIPNCBCE; 5.8FIPNCMCE
3853615
3853615 Exhaust pipe, exhaust pipe assy to exhaust elbow
5.0FIPHUBCE; 5.0FIPHUCCE; 5.0FIPHUECE, 5.0FiPMDA; 5.0FiPMDM; 5.8FiPMDA, 5.0FIPNCACE; 5.0FIPNCBCE; 5.0FIPNCMCE, 5.8FIPNCACE; 5.8FIPNCBCE; 5.8FIPNCMCE
3853609
3853609 Exhaust pipe
5.0FIPHUBCE; 5.0FIPHUCCE; 5.0FIPHUECE, 5.0FiPMDA; 5.0FiPMDM; 5.8FiPMDA, 5.0FIPNCACE; 5.0FIPNCBCE; 5.0FIPNCMCE, 5.8FIPNCACE; 5.8FIPNCBCE; 5.8FIPNCMCE
3855059
3855059 Exhaust valve, 0.015 in. os
7.4GIPBYCCE; 7.4GIPBYDCE; 7.4GSIPBYCCE, 7.4GiPEFS; 7.4GSiPEFS; 8.2GSiPEFS, 7.4GIPWTR; 7.4GSIPWTR; 8.2GSIPWTR, 7.4GLPHUS; 7.4GIPHUSCE; 7.4GSIXHUS, 7.4GLPLKD; 7.4GLPLKE; 7.4GIPLKDCE, 7.4GLPNCA; 7.4GLPNCS; 7.4GLPNCM
3850215