20529905 Volvo.Penta Flywheel housing

Table 1
J1939 Code and Description Comments
1393-11
Engine Cylinder #1 Ignition Transformer Secondary Output : Other Failure Mode The code indicates that a low voltage ignition coil is installed on an engine that contains one or more high-voltage coils in the system. The software defaults to a high-voltage system to power the high-voltage coils.
1393-15
Engine Cylinder #1 Ignition Transformer Secondary Output : High - least severe (1) The Electronic Control Module (ECM) detects signal voltage that is not in the acceptable range.
The code is logged.
The value of the parameter is set to a default value.
1394-11
Engine Cylinder #2 Ignition Transformer Secondary Output : Other Failure Mode The code indicates that a low voltage ignition coil is installed on an engine that contains one or more high-voltage coils in the system. The software defaults to a high-voltage system to power the high-voltage coils.
1394-15
Engine Cylinder #2 Ignition Transformer Secondary Output : High - least severe (1) The Electronic Control Module (ECM) detects signal voltage that is not in the acceptable range.
The code is logged.
The value of the parameter is set to a default value.
1395-11
Engine Cylinder #3 Ignition Transformer Secondary Output : Other Failure Mode The code indicates that a low voltage ignition coil is installed on an engine that contains one or more high-voltage coils in the system. The software defaults to a high-voltage system to power the high-voltage coils.
1395-15
Engine Cylinder #3 Ignition Transformer Secondary Output : High - least severe (1) The Electronic Control Module (ECM) detects signal voltage that is not in the acceptable range.
The code is logged.
The value of the parameter is set to a default value.
1396-11
Engine Cylinder #4 Ignition Transformer Secondary Output : Other Failure Mode The code indicates that a low voltage ignition coil is installed on an engine that contains one or more high-voltage coils in the system. The software defaults to a high-voltage system to power the high-voltage coils.
1396-15
Engine Cylinder #4 Ignition Transformer Secondary Output : High - least severe (1) The Electronic Control Module (ECM) detects signal voltage that is not in the acceptable range.
The code is logged.
The value of the parameter is set to a default value.
1397-11
Engine Cylinder #5 Ignition Transformer Secondary Output : Other Failure Mode The code indicates that a low voltage ignition coil is installed on an engine that contains one or more high-voltage coils in the system. The software defaults to a high-voltage system to power the high-voltage coils.
1397-15
Engine Cylinder #5 Ignition Transformer Secondary Output : High - least severe (1) The Electronic Control Module (ECM) detects signal voltage that is not in the acceptable range.
The code is logged.
The value of the parameter is set to a default value.
1398-11
Engine Cylinder #6 Ignition Transformer Secondary Output : Other Failure Mode The code indicates that a low voltage ignition coil is installed on an engine that contains one or more high-voltage coils in the system. The software defaults to a high-voltage system to power the high-voltage coils.
1398-15
Engine Cylinder #6 Ignition Transformer Secondary Output : High - least severe (1) The Electronic Control Module (ECM) detects signal voltage that is not in the acceptable range.
The code is logged.
The value of the parameter is set to a default value.
1399-11
Engine Cylinder #7 Ignition Transformer Secondary Output : Other Failure Mode The code indicates that a low voltage ignition coil is installed on an engine that contains one or more high-voltage coils in the system. The software defaults to a high-voltage system to power the high-voltage coils.
1399-15
Engine Cylinder #7 Ignition Transformer Secondary Output : High - least severe (1) The Electronic Control Module (ECM) detects signal voltage that is not in the acceptable range.
The code is logged.
The value of the parameter is set to a default value.
1400-11
Engine Cylinder #8 Ignition Transformer Secondary Output : Other Failure Mode The code indicates that a low voltage ignition coil is installed on an engine that contains one or more high-voltage coils in the system. The software defaults to a high-voltage system to power the high-voltage coils.
1400-15
Engine Cylinder #8 Ignition Transformer Secondary Output : High - least severe (1) The Electronic Control Module (ECM) detects signal voltage that is not in the acceptable range.
The code is logged.
The value of the parameter is set to a default value.
1401-11
Engine Cylinder #9 Ignition Transformer Secondary Output : Other Failure Mode The code indicates that a low voltage ignition coil is installed on an engine that contains one or more high-voltage coils in the system. The software defaults to a high-voltage system to power the high-voltage coils.
1401-15
Engine Cylinder #9 Ignition Transformer Secondary Output : High - least severe (1) The Electronic Control Module (ECM) detects signal voltage that is not in the acceptable range.
The code is logged.
The value of the parameter is set to a default value.
1402-11
Engine Cylinder #10 Ignition Transformer Secondary Output : Other Failure Mode The code indicates that a low voltage ignition coil is installed on an engine that contains one or more high-voltage coils in the system. The software defaults to a high-voltage system to power the high-voltage coils.
1402-15
Engine Cylinder #10 Ignition Transformer Secondary Output : High - least severe (1) The Electronic Control Module (ECM) detects signal voltage that is not in the acceptable range.
The code is logged.
The value of the parameter is set to a default value.
1403-11
Engine Cylinder #11 Ignition Transformer Secondary Output : Other Failure Mode The code indicates that a low voltage ignition coil is installed on an engine that contains one or more high-voltage coils in the system. The software defaults to a high-voltage system to power the high-voltage coils.
1403-15
Engine Cylinder #11 Ignition Transformer Secondary Output : High - least severe (1) The Electronic Control Module (ECM) detects signal voltage that is not in the acceptable range.
The code is logged.
The value of the parameter is set to a default value.
1404-11
Engine