806622 Flywheel housing Volvo.Penta
AQ115A; AQ115B; AQ130
Flywheel
Price: query
Rating:
You can buy parts:
As an associate, we earn commssions on qualifying purchases through the links below
$104.44
01-06-2024
3.0[1.35] Pounds
US: Race-Driven Inc
Piston Kit fits Ski-Doo GSX 800 SE ETEC 2012-2015 Teflon Coated by Race-Driven
Race-Driven Race-Driven Piston Kit with Teflon Coated Skirt and Hardened Dome. || Race-driven pistons are designed to be a direct replacement for factory style pistons which closely match the original equipment in ring design and construction. || All piston assemblies include rings, wrist pin and circlips. || Fits: 2012 2013 2014 2015 Ski-Doo GSX 800R SE ETEC
Race-Driven Race-Driven Piston Kit with Teflon Coated Skirt and Hardened Dome. || Race-driven pistons are designed to be a direct replacement for factory style pistons which closely match the original equipment in ring design and construction. || All piston assemblies include rings, wrist pin and circlips. || Fits: 2012 2013 2014 2015 Ski-Doo GSX 800R SE ETEC
$46.99
20-09-2019
-: -
Theron Fleury Hand Signed Autographed Hockey Beckett Magazine -Back GA GV 806622
Global Authentics, the company who provides the authenticity of this item. Most items will come with a matching hologram sticker and Certificate. Some items may only come with a hologram attached. Please see images for more details. || This item has been hand-signed by the athlete or celebrity. This is not a reproduced autograph. Please view image closely to ensure the item quality will meet your needs. || We may have multiple copies of this item available – photo is just a sample of one example, so there may be slight differences in the one you receive. If there is a COA or serial number in the item title, you will receive the exact item pictured unless otherwise stated. || Please note - Expedited Shipping is not available on larger/heavier items. Framed jerseys, framed photos 16X20 or greater, etc. may not be eligible. Please contact us first to be sure. Customers with multiple returns may be charged a 15% restocking fee for no-fault orders.
Global Authentics, the company who provides the authenticity of this item. Most items will come with a matching hologram sticker and Certificate. Some items may only come with a hologram attached. Please see images for more details. || This item has been hand-signed by the athlete or celebrity. This is not a reproduced autograph. Please view image closely to ensure the item quality will meet your needs. || We may have multiple copies of this item available – photo is just a sample of one example, so there may be slight differences in the one you receive. If there is a COA or serial number in the item title, you will receive the exact item pictured unless otherwise stated. || Please note - Expedited Shipping is not available on larger/heavier items. Framed jerseys, framed photos 16X20 or greater, etc. may not be eligible. Please contact us first to be sure. Customers with multiple returns may be charged a 15% restocking fee for no-fault orders.
$3.09
07-10-2017
.4[0.00] pounds
A&H Ab: A&H Abrasives
3x24 Aluminum Oxide 60 Grit Sander Belt, x-weight<br>A&H Abrasives 806622
THE BEST ABRASIVE BELTS FOR GENERAL WOODWORKING APPLICATIONS.||Specifications: Width=3 in, Length=24 in, Abrasive=ALUMINUM OXIDE||Specifications: Abrasive Bond=PHENOLIC RESIN, Backing=CLOTH, Backing Weight=X
THE BEST ABRASIVE BELTS FOR GENERAL WOODWORKING APPLICATIONS.||Specifications: Width=3 in, Length=24 in, Abrasive=ALUMINUM OXIDE||Specifications: Abrasive Bond=PHENOLIC RESIN, Backing=CLOTH, Backing Weight=X
Number on catalog scheme: 1
Compatible models:
AQ115A; AQ115B; AQ130
Volvo.Penta
Volvo Penta entire parts catalog list:
Information:
Start By:a. remove valve covers 1. Remove bolts (1) that hold the valve cover bases to the cylinder head assembly. Remove valve cover bases (2). 2. Use tool (A) to loosen fuel injection line (3) from fuel injection nozzle (4). 3. Use tool (B) to loosen the nut at the fuel injection line adapter end. Remove inner fuel injection lines (3). Install caps and plugs on all fuel injection line openings to keep dirt out of the fuel system. 4. Remove bolts (5) that hold the rocker shaft assemblies to the cylinder head assembly.5. Remove rocker shaft assemblies (6). 6. Put identification marks on the push rods as to their location in the engine. Remove push rods (7). 7. Put identification marks on the bridges as to their location in the engine. Remove bridges (8) from the dowels on the cylinder head assembly.Install Rocker Shaft Assemblies And Push Rods
1. Put clean engine oil on the bridges and dowels. Install the original bridges in their respective locations. New bridges can be mixed.2. Install bridges (8) on the bridge dowels. While firmly pressing 0.5 to 4.5 kg (1 to 10 lb.) straight down on the top contact surface of the bridge, turn the adjusting screw clockwise until contact is made with the valve stem. Turn the screw an additional 20° to 30° (1/3 to 1/2 of 1 hex on nut). This will straighten the dowel in the guide and compensate for the slack in the threads. Hold the adjusting screw in this position, and tighten the locknut to a torque of 30 4 N m (22 3 lb.ft.). Install original push rods in their respective locations in the engine. New push rods can be mixed.3. Install push rods (7). 4. Put rocker shaft assemblies (6) in position on the cylinder head assembly.5. Put clean engine oil on the threads of bolts (5) that hold the shaft assemblies in place. Tighten the bolts first to a torque of 270 25 N m (200 18 lb.ft.). Start with the bolt in the center of the rocker shaft assembly. Tighten the bolts again to a torque of 450 20 N m (330 15 lb.ft.). Tighten the bolts again by hand to a torque of 450 20 N m (330 15 lb.ft.).
Do not cause damage to the O-ring seals on the inner fuel lines.
6. Install inner fuel injection lines (3). Tighten the fuel injection line adapter nuts (9) to a torque of 40 7 N m (30 5 lb.ft.) with tool (B).7. Tighten fuel injection line nut (10) to a torque of 40 7 N m (30 5 lb.ft.) with tool (A).8. Make adjustments to the valves until the intake valve clearance is 0.38 mm (.015 in.) and the exhaust valve clearance is 0.76 mm (.030 in.). See Valve Clearance Setting in Testing And Adjusting. Tighten the locknut to a torque of 30 4 N m (22 3 lb.ft.) and check the adjustments. 9. Install valve cover bases (2) on the cylinder head assembly. Install bolts that hold the valve cover bases in place. Tighten bolts (1) to a torque of 14 3 N m (10 2 lb.ft.).End By:a. install valve covers
1. Put clean engine oil on the bridges and dowels. Install the original bridges in their respective locations. New bridges can be mixed.2. Install bridges (8) on the bridge dowels. While firmly pressing 0.5 to 4.5 kg (1 to 10 lb.) straight down on the top contact surface of the bridge, turn the adjusting screw clockwise until contact is made with the valve stem. Turn the screw an additional 20° to 30° (1/3 to 1/2 of 1 hex on nut). This will straighten the dowel in the guide and compensate for the slack in the threads. Hold the adjusting screw in this position, and tighten the locknut to a torque of 30 4 N m (22 3 lb.ft.). Install original push rods in their respective locations in the engine. New push rods can be mixed.3. Install push rods (7). 4. Put rocker shaft assemblies (6) in position on the cylinder head assembly.5. Put clean engine oil on the threads of bolts (5) that hold the shaft assemblies in place. Tighten the bolts first to a torque of 270 25 N m (200 18 lb.ft.). Start with the bolt in the center of the rocker shaft assembly. Tighten the bolts again to a torque of 450 20 N m (330 15 lb.ft.). Tighten the bolts again by hand to a torque of 450 20 N m (330 15 lb.ft.).
Do not cause damage to the O-ring seals on the inner fuel lines.
6. Install inner fuel injection lines (3). Tighten the fuel injection line adapter nuts (9) to a torque of 40 7 N m (30 5 lb.ft.) with tool (B).7. Tighten fuel injection line nut (10) to a torque of 40 7 N m (30 5 lb.ft.) with tool (A).8. Make adjustments to the valves until the intake valve clearance is 0.38 mm (.015 in.) and the exhaust valve clearance is 0.76 mm (.030 in.). See Valve Clearance Setting in Testing And Adjusting. Tighten the locknut to a torque of 30 4 N m (22 3 lb.ft.) and check the adjustments. 9. Install valve cover bases (2) on the cylinder head assembly. Install bolts that hold the valve cover bases in place. Tighten bolts (1) to a torque of 14 3 N m (10 2 lb.ft.).End By:a. install valve covers
Parts flywheel Volvo Penta:
826703
832764
419719
463081
430055
461325
826807
831390