3853275 Volvo.Penta Gasket

Table 1
Diagnostic Code Table    
Description    Conditions which Generate this Code    System Response    
267-2 Remote Shutdown Input erratic, intermittent, or incorrect     Both of the switch contacts for the shutdown switch are in the open state or both of the switch contacts for the shutdown switch are in the closed state.     If both of the switch contacts from the shutdown switch change to the same state and the engine is running, the engine will continue to run. The code is logged.    Determine if the shutdown was intentional or accidental. If the shutdown was intentional, make sure that the reason for the shutdown has been corrected. Reset the control system. Resume normal operation.The shutdown switch provides the ability to shut down the engine. The engine's Electronic Control Module (ECM) remains active. Caterpillar Electronic Technician (ET) can be used to communicate with the ECM. The shutdown switch must be returned to the Run position and the engine rpm must be zero before the ECM will allow the engine to start.To shut down the engine, lift the red cover guard and toggle the shutdown switch to the Shutdown position. The ECM reads the position