955363 Hexagon screw Volvo.Penta
AQD70D; TAMD70D; TAMD70E, D12D-A MH; D12D-B MH; D12D-C MH, D13B-E MH; D13B-E MH (FE); D13B-N MH, D9A2A; D9A2A D9-425; D9A2A D9-500, MD70B; MD70BK; TMD70B, MD70C; TMD70C; TAMD70C, TAD1630P; TWD1630P; TWD1630PP, TAD1630V; TWD1630V, TAMD103A, TAMD122A;
Hexagon
Price: query
Rating:
You can buy parts:
As an associate, we earn commssions on qualifying purchases through the links below
$169.95
27-07-2024
Amazon.com
Trail Ridge Mirror Set Compatible with 1999-2004 Ford F-250 F-350 F-450 Super Duty F-550 Super Duty
Trail Ridge Lifetime Warranty This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part. This warranty covers the cost of the part only. || Reference Number(s): 12800623L,1C3Z17683FAA,3030131,3C3Z17682DAA,955363,FO1320196,FO1321227 || Mirror Memory Type: Without Memory || Quantity: 2 Piece
Trail Ridge Lifetime Warranty This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part. This warranty covers the cost of the part only. || Reference Number(s): 12800623L,1C3Z17683FAA,3030131,3C3Z17682DAA,955363,FO1320196,FO1321227 || Mirror Memory Type: Without Memory || Quantity: 2 Piece
Dorman 955-363 Door Mirror
Dorman Meets Or Exceeds OEM Specs || Factory OEM Fit Form And Function
Dorman Meets Or Exceeds OEM Specs || Factory OEM Fit Form And Function
$179.95
22-03-2024
Amazon.com
Trail Ridge Mirror Set Compatible with 1999-2004 Ford F-250 Super Duty F-350 Super Duty F-450 Super Duty
Trail Ridge Lifetime Warranty This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only. || Reference Number(s): 1C3Z17683FAA,3030131,3C3Z17682DAA,3C3Z17682DABCP,955363,FO1320196,FO1321227 || Quantity: 2 Piece
Trail Ridge Lifetime Warranty This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only. || Reference Number(s): 1C3Z17683FAA,3030131,3C3Z17682DAA,3C3Z17682DABCP,955363,FO1320196,FO1321227 || Quantity: 2 Piece
Compatible models:
AQD70D; TAMD70D; TAMD70E
D12D-A MH; D12D-B MH; D12D-C MH
D13B-E MH; D13B-E MH (FE); D13B-N MH
D9A2A; D9A2A D9-425; D9A2A D9-500
MD70B; MD70BK; TMD70B
MD70C; TMD70C; TAMD70C
TAD1630P; TWD1630P; TWD1630PP
TAD1630V; TWD1630V
TAMD103A
TAMD122A; TMD122A; TAMD122P-A
TAMD162A; TAMD162B; TAMD162C
TAMD61A; TAMD62A
TAMD71A; TAMD72A
TAMD71B; TAMD73P-A; TAMD73WJ-A
TAMD72P-A; TAMD72WJ-A
TAMD74A; TAMD74A-A; TAMD74A-B
TID162AG; TID162AGP; TID162AP
TMD121C; TAMD121C; TAMD121D
TWD1620G; TWD1630G; TAD1630G
Volvo.Penta
Volvo Penta entire parts catalog list:
- Engine Suspension: B » 955363
D13B-E MH; D13B-E MH (FE); D13B-N MH; D13B-N MH (FE)
D9A2A; D9A2A D9-425; D9A2A D9-500; D9A2A D9-500 (R4); D9A2A D9-575; D9A2B D9-425; D9A2B D9-500 (R5); D9A2B D9-575; D9A2C D9-425; D9A2D D9
MD70B; MD70BK; TMD70B; THAMD70B; TAMD70B; AQD70BL; AQD70B
MD70C; TMD70C; TAMD70C; THAMD70C; AQD70BL; AQD70CL
TAD1630P; TWD1630P; TWD1630PP; TAD1630PB
TAD1630V; TWD1630V
TAMD103A
TAMD122A; TMD122A; TAMD122P-A; TAMD122P-B; TAMD122P-C; TMD122A/C; TAMD122AF
TAMD162A; TAMD162B; TAMD162C; TAMD162C-B
TAMD61A; TAMD62A
TAMD71A; TAMD72A
TAMD71B; TAMD73P-A; TAMD73WJ-A
- Engine Suspension for Reverse Gear MG 507, MG 507-1, MG 507-1E, MG 507A, MG 507A-1, MG 507A-1E
- Engine Suspension for Reverse Gear MG 507, MG 507-1, MG 507-1E, MG 507A, MG 507A-1, MG 507A-1E
- Engine Suspension for Reverse Gear MG 507, MG 507-1, MG 507-1E, MG 507A, MG 507A-1, MG 507A-1E
- Engine Suspension for Reverse Gear MG 507, MG 507-1, MG 507-1E, MG 507A, MG 507A-1, MG 507A-1E
- Engine Suspension for Reverse Gear MG5075A-E, MG5075SC
- Engine Suspension for Reverse Gear MG 5085A-E, MG5085SC-E
TMD121C; TAMD121C; TAMD121D; TAMD122C; TAMD122D
- Reverse Gear Suspension for Twin Disc MG514, MG5111SC, MG5114SC: Twin Disc MG5111SC, MG5114SC
- Reverse Gear Suspension for Twin Disc MG5114SC: Twin Disc 5114SC
Information:
Table 1
Troubleshooting Test Steps Values Results
1. Check the Fuel Level
A. Remove the fuel tank cap from the fuel tank.
B. Check the vent port that is in the cap for debris. Remove any debris with compressed air.
C. Visually inspect the fuel level in the tank. Ensure that the fuel tank has enough fuel to operate the engine.
D. Check the position of the fuel supply valve (if equipped). The valve must be in the full OPEN position.
Fuel Level
Result: The fuel level is OK.
Proceed to Test Step 2.
Result: The fuel level is low.
Repair: Fill the tank with fuel. Proceed to Test Step 5.
Table 2
Required Parts Kit
FT-3155 Gauge Kit
Illustration 1 g03766460
(1) Output port of the pump
Illustration 2 g02313813
Assembled required parts
Table 3
Troubleshooting Test Steps Values Results
2. Check the Fuel Pressure at the ARD Fuel Supply
A. Disconnect the ARD fuel line from the pump.
B. Install the FT-3155 Gauge Kit at the pump outlet port.
C. Turn the keyswitch to the ON position. Start the engine.
D. Establish communication between Cat ET and the "Engine #1 Aftertreatment Controller".
E. Select the "Aftertreatment Fuel Pump Relay Override" to activate the pump.
F. Override the pump and record the pressure from the pressure gauge.
G. Deactivate the override.
H. Turn the keyswitch to the OFF position.
I. The pressure must be within specifications. The pump pressure must be 1900 120 kPa (276 17 psi).
1900 120 kPa (276 17 psi)
Result:The pressure measured 1900 120 kPa (276 17 psi).
Proceed to Test Step 5.
Result:The pressure is less than 1900 120 kPa (276 17 psi).
Repair: Replace the primary fuel filter. Proceed to Test Step 3.
Result:The pressure measured 0 kPa (0 psi).
Inspect the wiring at the pump. If the wiring is OK and the pump does not activate, replace the Fuel Priming Pump group assembly.
Proceed to Test Step 5.
Illustration 3 g03766470
(2) ARD pump wiring
(3) Diverter valve
(4) Priming Pump
(5) Pressure regulator
Table 4
Troubleshooting Test Steps Values Results
3. Check the Pressure Regulator
A. Turn the keyswitch to the ON position. Start the engine.
B. Establish communication between Cat ET and the ECM.
C. Select the"Aftertreatment Fuel Pump Relay Override" in order to activate the pump.
D. Record the pressure on the pressure gauge.
E. Refer to ARD Fuel Pump (Current) - Test and record current for the ARD Fuel Pump.
F. Turn the keyswitch to the OFF position.
1900 120 kPa (276 17 psi)
7.5 1.5 Amps on 24 Volt System
19.5 2.5 Amps on 12 Volt System
Result: The pressure measured 1900 120 kPa (276 17 psi) and current measured 7.5 1.5 Amps (24 V) 19.5 2.5 Amps on (12 V).
Proceed to Test Step 5.
Result: The pressure did not measure 1900 120 kPa (276 17 psi) and current measured 7.5 1.5 Amps (24 V) 19.5 2.5 Amps on (12 V).
Repair: Replace the fuel pressure regulator located in the pump base. Refer to Specifications in SIS for correct installation torque 28 3 N m (248 27 lb in).
Proceed to Test Step 4.
Result: The Pressure did not measure 1900 120 kPa (276 17 psi) and current did not measure 7.5 1.5 Amps (24 V) 19.5 2.5 Amps on (12 V).
Repair: Replace the Fuel Priming Pump Group Assembly.
Proceed to Test Step 5.
4. Check the Fuel Diverter Valve
A. Disconnect the pilot and main fuel lines from the ARD head and place them into a bucket.
B. Turn the keyswitch to the ON position. Establish communication between Cat ET and the ECM. Disable ARD Regens.
C. Start the engine.
D. Select the"Aftertreatment Fuel Pump Relay Override" to activate the pump.
E. Record the pressure from the pressure gauge.
F. Refer to ARD Fuel Pump (Current) - Test and record current for the ARD Fuel Pump.
G. Turn the keyswitch to the OFF position.
1900 120 kPa (276 17 psi)
7.5 1.5 Amps on 24 Volt System
19.5 2.5 Amps on 12 Volt System
Result:The pressure measured 1900 120 kPa (276 17 psi) and current measured 7.5 1.5 Amps (24 V) 19.5 2.5 Amps on (12 V).
Reconnect the ARD fuel lines to the ARD head. Proceed to Test Step 5.
Result:The pressure did not measure 1900 120 kPa (276 17 psi), the current measured 7.5 1.5 Amps (24 V) 19.5 2.5 Amps on (12 V) and no fuel flow from the ARD head fuel lines.
Repair: Replace the fuel diverter valve.
Reconnect the ARD fuel lines to the ARD head. Proceed to Test Step 5.
Result:The pressure did not measure 1900 120 kPa (276 17 psi), the current measured 7.5 1.5 Amps (24 V) 19.5 2.5 Amps on (12 V) and there was fuel flow from the ARD head fuel lines.
Replace the ARD fuel valve that matches the fuel lines with leaking fuel.
Reconnect the ARD fuel lines to the ARD head. Proceed to Test Step 5.
5. Perform a Manual DPF Regeneration
This test must be performed through Cat ET. The Cat ET service tool enhances the diagnostics during the service test.
A. Turn the keyswitch to the ON position. Start the engine.
B. Establish communication between Cat ET and the "Engine #1 Aftertreatment Controller".
C. Start a Manual DPF regeneration using Cat ET.
Successful Regeneration
Result:The manual DPF regeneration completed successfully.
Return to service.
Result:The manual DPF regeneration did not complete
Parts hexagon Volvo Penta:
940162
940162 Hexagon screw
430; 430A; 430B, 500; 500A; 501A, 571A, AQ115A; AQ115B; AQ130, AQ175A, AQ190A; AQ240A, AQ200B; AQ225B, AQ200C; AQ200D; AQ225C, AQ200D; AQ200F; 280B, AQ205A; AQ205LB, AQ211A; DP-A; SP-A, AQ225D; AQ225E; AQ225F, AQ231A; AQ231B; AQ231LB, AQ260A; AQ260B;
955536
955536 Hexagon screw
430; 430A; 430B, 500; 500A; 501A, 571A, 740A; BB740A, AQ115A; AQ115B; AQ130, AQ175A, AQ200B; AQ225B, AQ200C; AQ200D; AQ225C, AQ200D; AQ200F; 280B, AQ205A; AQ205LB, AQ211A; DP-A; SP-A, AQ225D; AQ225E; AQ225F, AQ231A; AQ231B; AQ231LB, AQ260A; AQ260B; B
955827
955827 Hexagon nut
430; 430A; 430B, 500; 500A; 501A, 571A, AQ115A; AQ115B; AQ130, AQ175A, AQ190A; AQ240A, AQ200C; AQ200D; AQ225C, AQ225D; AQ225E; AQ225F, AQ260A; AQ260B; BB260A, AQD70D; TAMD70D; TAMD70E, D100A; D100AK; D100B, D100BHC; D100BRC; TD100AHC, D120A; D120AK;
955269
955269 Hexagon screw
2001; 2001B; 2001AG, AD30A; AQAD30A; MD30A, AQ115A; AQ115B; AQ130, D100A; D100AK; D100B, D100BHC; D100BRC; TD100AHC, D120A; D120AK; TD120A, D13B-A MP; D13B-B MP; D13B-C MP, D5A-T; D5A-TA; D5A-B TA, D70B; D70B PP; D70B K, D70CHC; D70CRC; TD70CHC, MB2,
955779
955779 Hexagon nut
2001; 2001B; 2001AG, 230A; 230B; 250A, 251A, 430; 430A; 430B, 500; 500A; 501A, 571A, 740A; BB740A, AD30A; AQAD30A; MD30A, AD31D; AD31D-A; AD31XD, AD31L-A; AD31P-A; AD41L-A, AD41D; D41D; TAMD41D, AQ115A; AQ115B; AQ130, AQ120B; AQ125A; AQ140A, AQ125B,
955270
955270 Hexagon screw
2001; 2001B; 2001AG, 430; 430A; 430B, 500; 500A; 501A, AD30A; AQAD30A; MD30A, AD31D; AD31D-A; AD31XD, AD31L-A; AD31P-A; AD41L-A, AD41D; D41D; TAMD41D, AQ115A; AQ115B; AQ130, AQ120B; AQ125A; AQ140A, AQ125B, AQ131A; AQ131B; AQ131C, AQ145A; BB145A, AQ14
955512
955512 Hexagon screw
230A; 230B; 250A, 430; 430A; 430B, 500; 500A; 501A, 571A, 740A; BB740A, AD31D; AD31D-A; AD31XD, AD31L-A; AD31P-A; AD41L-A, AD41D; D41D; TAMD41D, AQ115A; AQ115B; AQ130, AQ120B; AQ125A; AQ140A, AQ145A; BB145A, AQ175A, AQ200B; AQ225B, AQ200C; AQ200D; AQ
940172
940172 Hexagon screw
AD31L-A; AD31P-A; AD41L-A, AQ115A; AQ115B; AQ130, AQD70D; TAMD70D; TAMD70E, KAD32P; TAMD42WJ-A; KAD43P-A, MB10A, MD11; MD11C; MD11D, MD1B; MD2B; AQD2B, MD22L; MD22P; MD22L-B, MD5A; MD5B; MD5C, MD6; MD6A; MD6B, MD70B; MD70BK; TMD70B, MD70C; TMD70C; TA