866371 Injection pump Volvo.Penta
TID162AG; TID162AGP; TID162AP
Injection
Price: query
Rating:
You can buy parts:
As an associate, we earn commssions on qualifying purchases through the links below
$609.99
27-07-2024
10.0[4.50] pounds
US: Newport Fasteners
MS21318-35 / #7 x 5/16" Mil Spec U-Drive Self Tapping/Steel/Cad (Carton: 4,000 pcs)
Newport Fasteners Round Head Type U || Drive Screw || Tested and Certified to Military Standards || Steel Cadmium Plated || Free Manufacturer’s Certification Available
Newport Fasteners Round Head Type U || Drive Screw || Tested and Certified to Military Standards || Steel Cadmium Plated || Free Manufacturer’s Certification Available
Compatible models:
TID162AG; TID162AGP; TID162AP
Volvo.Penta
Volvo Penta entire parts catalog list:
Information:
If the application is equipped with two throttles, the engine will use the second throttle until the fault is repaired.If a second throttle is not installed or if the second throttle has a fault, the following conditions will occur:
The engine will default to limp home mode.
If the engine speed is higher than the speed in limp home mode, the engine will decelerate to limp home mode.
If the engine speed is lower than the speed in limp home mode, the engine speed will remain at the current speed.
The engine will remain at this speed while the diagnostic code remains active.
All inputs from the faulty throttle are ignored by the ECM until the fault is repaired.
All inputs from the repaired throttle will be ignored by the ECM until the keyswitch has been cycled.The IVS may be installed. The IVS is required for mobile applications with an analog throttle installed. The IVS is part of the throttle position sensor. The IVS is CLOSED when the low idle is set.The configuration parameters for the throttle and for the IVS thresholds are programmed into the ECM. Use
The engine will default to limp home mode.
If the engine speed is higher than the speed in limp home mode, the engine will decelerate to limp home mode.
If the engine speed is lower than the speed in limp home mode, the engine speed will remain at the current speed.
The engine will remain at this speed while the diagnostic code remains active.
All inputs from the faulty throttle are ignored by the ECM until the fault is repaired.
All inputs from the repaired throttle will be ignored by the ECM until the keyswitch has been cycled.The IVS may be installed. The IVS is required for mobile applications with an analog throttle installed. The IVS is part of the throttle position sensor. The IVS is CLOSED when the low idle is set.The configuration parameters for the throttle and for the IVS thresholds are programmed into the ECM. Use
Parts injection Volvo Penta:
3803768
849836
3803728
849441
3803697