415058 Locking wire Volvo.Penta
AQ115A; AQ115B; AQ130
Locking
Price: query
Rating:
You can buy parts:
As an associate, we earn commssions on qualifying purchases through the links below
XibanY 40cm Round Seat Cushion Pad Breathable Cotton Chair Cushion Pad for Home Office Sofa Chair Pad (Color : Color 16)
XibanY - [VERSATILE USAGE] The chair pad is designed to be used in multiple occasions, including dining room, living room, bedroom and office, making it perfect for hard wood or metal surfaced chairs. || - [STYLISH DESIGN] With its stylish and textured design, this chair pad adds both comfort and elegance to any room it's placed in. || - [EASY MAINTENANCE] The chair cushion is made to last and withstand wear and tear. It is also easy to clean, just wipe spot lightly with a damp cloth and wait to dry. || - [COMFORTABLE] The chair pad is made of soft and comfortable materials that provide added comfort to your seating experience. || - [SECURE FIT] The chair pad features non-slip backing to keep it securely in place on your chair.
XibanY - [VERSATILE USAGE] The chair pad is designed to be used in multiple occasions, including dining room, living room, bedroom and office, making it perfect for hard wood or metal surfaced chairs. || - [STYLISH DESIGN] With its stylish and textured design, this chair pad adds both comfort and elegance to any room it's placed in. || - [EASY MAINTENANCE] The chair cushion is made to last and withstand wear and tear. It is also easy to clean, just wipe spot lightly with a damp cloth and wait to dry. || - [COMFORTABLE] The chair pad is made of soft and comfortable materials that provide added comfort to your seating experience. || - [SECURE FIT] The chair pad features non-slip backing to keep it securely in place on your chair.
XibanY Thick Bench Seat Cushion for Indoor Backrest Chair Seat Pad Long Cushion Cushions Sofa Tatami Bench Decorative (Color : 3, Size : 48x120cm)
XibanY - [COMFORTABLE SEATING] The chair pad is designed to provide comfortable seating for hard wooden or metal chairs, perfect for use during weddings, receptions, conferences, or any event you have planned. || - [SECURE FIT] The chair pad features ties to securely fasten it to the chair and avoid slipage. || - [VERSATILE USE] The chair pad is suitable for use both indoors and outdoors, making it perfect for use on patio chairs or as an office chair pad. || - [VARIETY OF COLORS] The chair pad is available in a variety of colors, allowing you to choose the perfect match for your event or home décor. || - [DURABLE MATERIALS] The chair pad is made with quality materials that are durable and long-lasting, providing comfort and support for years to come.
XibanY - [COMFORTABLE SEATING] The chair pad is designed to provide comfortable seating for hard wooden or metal chairs, perfect for use during weddings, receptions, conferences, or any event you have planned. || - [SECURE FIT] The chair pad features ties to securely fasten it to the chair and avoid slipage. || - [VERSATILE USE] The chair pad is suitable for use both indoors and outdoors, making it perfect for use on patio chairs or as an office chair pad. || - [VARIETY OF COLORS] The chair pad is available in a variety of colors, allowing you to choose the perfect match for your event or home décor. || - [DURABLE MATERIALS] The chair pad is made with quality materials that are durable and long-lasting, providing comfort and support for years to come.
XibanY 1pcs Office Chair Pad Tatami Plush Padded Cushion Mat 1pcs Home Autumn Winter Rose Cushion (Color : Lightpink)
XibanY - [EASY TO FIT] Our chair pad is designed to fit all types of chairs perfectly, giving you the freedom to choose where to use them. || - [SUSTAINABLY DYED] The fabric used to create our chair pads is dyed in a more sustainable way that ensures the color stays fresh for longer and is. || - [MULTI-COLOR] Our chair pads come in a range of colors, making it easy for you to give your furniture a look while ensuring that your chairs are always in style. || - [BREATHABLE] The cover of our chair pad is made from breathable material that keeps you cool and comfortable, even during extended periods of sitting. || - [SKIN-FRIENDLY] Our chair pad cover is smooth to the touch and skin-friendly. It won't shrink or become deformed even after prolonged use.
XibanY - [EASY TO FIT] Our chair pad is designed to fit all types of chairs perfectly, giving you the freedom to choose where to use them. || - [SUSTAINABLY DYED] The fabric used to create our chair pads is dyed in a more sustainable way that ensures the color stays fresh for longer and is. || - [MULTI-COLOR] Our chair pads come in a range of colors, making it easy for you to give your furniture a look while ensuring that your chairs are always in style. || - [BREATHABLE] The cover of our chair pad is made from breathable material that keeps you cool and comfortable, even during extended periods of sitting. || - [SKIN-FRIENDLY] Our chair pad cover is smooth to the touch and skin-friendly. It won't shrink or become deformed even after prolonged use.
Compatible models:
AQ115A; AQ115B; AQ130
Volvo.Penta
Volvo Penta entire parts catalog list:
- Cooling System, Induction- and Exhaust Manifold: A » 415058
- Cooling System, Induction- and Exhaust Manifold: B
- Cooling System, Induction- and Exhaust Manifold: C
- Cooling System, Induction- and Exhaust Manifold: D
- Cooling System, Induction- and Exhaust Manifold: A
- Cooling System, Induction- and Exhaust Manifold: B
- Cooling System, Induction- and Exhaust Manifold: C
- Cooling System, Induction- and Exhaust Manifold: D
Information:
1. Disconnect tube assemblies (2) from diverter valve (3) and disconnect tube assemblies (1) from the shutoff control. 2. remove the bolts to remove cover (5), tube (4) and the diverter valve as a unit from the shutoff drive housing assembly and the shutoff control. 3. Disconnect tube assemblies (6), (7) and (9) from the shutoff control. Remove the bolts and hydra mechanical shutoff control (8) from the shutoff drive housing assembly. 4. Remove coupling (10) from the end of the shutoff drive gear.Install Hydra Mechanical Shutoff Control
1. Install coupling (2) on the end of the shutoff drive gear. 2. Put hydra mechanical shutoff control (1) and the gasket in position on the shutoff drive housing assembly. Make sure the shaft of the shutoff control is correctly engaged with the coupling and install the bolts to hold the shutoff control in position.3. Connect tube assemblies (3), (4) and (5) to the shutoff control. 4. Put clean engine oil on the O-ring seals and install tube (6) in the bottom of the shutoff control. Put cover (7) and the diverter valve as a unit in position on tube (6) and the shutoff drive housing assembly. Install the bolts to hold these in position. 5. Connect tube assemblies (8) to the shutoff control and connect tube assemblies (9) to the diverter valve.Disassemble Hydra Mechanical Shutoff Control
Start By:a. remove hydra mechanical shutoff control 1. Remove the bolts and remove actuator valve (1) from the pressure control valve.
There is spring pressure on cover (2).
2. Remove the bolts and remove cover (2) from the actuator valve body. 3. Remove springs (4), spacer (5) and valve assemblies (3) from the valve body. 4. Remove tube assembly (7) from the shutoff control.5. Remove pressure control valve (6) from the shutoff control. 6. Put identification marks on valve assemblies (12) and (13) for assembly purposes. Remove rack shutoff valve (12) and air inlet shutoff valve (13) from the pressure control body assembly. Remove three O-ring seals from each valve.7. Remove plug (11) to remove pilot valve (10) and spring (9) from the pressure control body assembly.8. Remove manual shutoff valve (8) as a unit from the pressure control body assembly. 9. Loosen nut (16) to remove knob (17) and nut (16) from valve (14). Remove adapter (18) and spring (19) from valve (14). Remove O-ring seal (15) from adapter (18). 10. Remove seal (20) from adapter (18). 11. Remove eight bolts (22) to remove gerotor pump group (21) from the shutoff control housing assembly. 12. Use Tool (A) to remove ring (24) and the washer from the carrier assembly shaft. Do not remove bolts (23) at this time. 13. Remove carrier assembly (25) from the gerotor pump group. 14. Remove dowels (27) to remove weights (26) from carrier (25). Remove pin (28) and use a press to remove shaft (29) from carrier (25). 15. Remove washer (30) from the pump group. 16. Remove the two bolts (23) to remove cover assembly (31) from the plate. 17. Remove gasket (32) from the plate. 18. Remove plate (33) from the housing assembly. 19. Remove seal (34) from plate (33). Carefully remove driven gear (36) from sleeve (35) so brush (39) and spring (38) do not become lost.20. To remove the gerotor assembly, remove drive gear (37), driven gear (36) and sleeve (35) from the housing assembly. 21. Remove brush (39) and spring (38) from driven gear (36). 22. Use Tool (B) to remove snap ring (43) and remove seat (42), spring (41) and plunger assembly (40) from the housing assembly. 23. Remove O-ring seal (44) from the housing assembly. 24. Remove speed sensing valve (46), spring (45) and the seat from the housing assembly guide. 25. Remove ring (50) to remove race (49), bearing (51) and race (48) from seat (52). Loosen nut (47) to remove seat (52) and nut (47) from speed sensing valve (46). 26. Remove shaft (53) to remove lever (54) from the housing assembly. 27. Remove the wire seal and bolts (55) to remove cover (56), the two seats and the spring from the housing assembly. 28. Use Tooling (C) to remove the guide from the housing assembly. Assemble Hydra Mechanical Shutoff Control
1. If necessary, make a replacement of dowels (2) and make sure they are 3.0 0.5 mm (.118 .020 in) above the surface of the housing assembly. 2. Put guide (1) in position in the housing assembly and make sure the dash mark on the end of the guide is in alignment with hole (3). Use Tooling (A) to install guide (1) in the housing assembly. 3. Put lever (5) in position in the housing assembly as shown and install shaft (4) to hold lever (5) in position. Make sure the end of the shaft is even (flush) 0.25 (.010 in) with the housing assembly. 4. Put the seat, spring (7) and seat (6) in position in cover (8) and put cover (8) and the gasket in position on the housing assembly. Install the bolts to hold the cover in position. 5. Install nut (15) and seat (10) on speed sensing valve (9). Make sure the dimension between the end of the valve and the nut face of the seat is 117.21 0.25 mm (4.614 .010 in) and tighten the nut. Put race (14), bearing (11) and race (13) in position on seat (10) and install ring (12) to hold these in position. 6. Install seat (16), spring (17) and speed sensing valve (9) on the housing assembly guide. 7. Put clean engine oil on O-ring seal (18) and put O-ring seal (18), plunger assembly (19), spring (20) and seat (21) in position in the housing assembly. Use Tool (B) to install snap ring (22) to hold the plunger assembly, the spring and seat in position. 8. If necessary, make a replacement of pin (24) and make sure pin (24) is 3.96 0.50 mm (.156 .020 in) above the bottom surface of the bore. 9.
1. Install coupling (2) on the end of the shutoff drive gear. 2. Put hydra mechanical shutoff control (1) and the gasket in position on the shutoff drive housing assembly. Make sure the shaft of the shutoff control is correctly engaged with the coupling and install the bolts to hold the shutoff control in position.3. Connect tube assemblies (3), (4) and (5) to the shutoff control. 4. Put clean engine oil on the O-ring seals and install tube (6) in the bottom of the shutoff control. Put cover (7) and the diverter valve as a unit in position on tube (6) and the shutoff drive housing assembly. Install the bolts to hold these in position. 5. Connect tube assemblies (8) to the shutoff control and connect tube assemblies (9) to the diverter valve.Disassemble Hydra Mechanical Shutoff Control
Start By:a. remove hydra mechanical shutoff control 1. Remove the bolts and remove actuator valve (1) from the pressure control valve.
There is spring pressure on cover (2).
2. Remove the bolts and remove cover (2) from the actuator valve body. 3. Remove springs (4), spacer (5) and valve assemblies (3) from the valve body. 4. Remove tube assembly (7) from the shutoff control.5. Remove pressure control valve (6) from the shutoff control. 6. Put identification marks on valve assemblies (12) and (13) for assembly purposes. Remove rack shutoff valve (12) and air inlet shutoff valve (13) from the pressure control body assembly. Remove three O-ring seals from each valve.7. Remove plug (11) to remove pilot valve (10) and spring (9) from the pressure control body assembly.8. Remove manual shutoff valve (8) as a unit from the pressure control body assembly. 9. Loosen nut (16) to remove knob (17) and nut (16) from valve (14). Remove adapter (18) and spring (19) from valve (14). Remove O-ring seal (15) from adapter (18). 10. Remove seal (20) from adapter (18). 11. Remove eight bolts (22) to remove gerotor pump group (21) from the shutoff control housing assembly. 12. Use Tool (A) to remove ring (24) and the washer from the carrier assembly shaft. Do not remove bolts (23) at this time. 13. Remove carrier assembly (25) from the gerotor pump group. 14. Remove dowels (27) to remove weights (26) from carrier (25). Remove pin (28) and use a press to remove shaft (29) from carrier (25). 15. Remove washer (30) from the pump group. 16. Remove the two bolts (23) to remove cover assembly (31) from the plate. 17. Remove gasket (32) from the plate. 18. Remove plate (33) from the housing assembly. 19. Remove seal (34) from plate (33). Carefully remove driven gear (36) from sleeve (35) so brush (39) and spring (38) do not become lost.20. To remove the gerotor assembly, remove drive gear (37), driven gear (36) and sleeve (35) from the housing assembly. 21. Remove brush (39) and spring (38) from driven gear (36). 22. Use Tool (B) to remove snap ring (43) and remove seat (42), spring (41) and plunger assembly (40) from the housing assembly. 23. Remove O-ring seal (44) from the housing assembly. 24. Remove speed sensing valve (46), spring (45) and the seat from the housing assembly guide. 25. Remove ring (50) to remove race (49), bearing (51) and race (48) from seat (52). Loosen nut (47) to remove seat (52) and nut (47) from speed sensing valve (46). 26. Remove shaft (53) to remove lever (54) from the housing assembly. 27. Remove the wire seal and bolts (55) to remove cover (56), the two seats and the spring from the housing assembly. 28. Use Tooling (C) to remove the guide from the housing assembly. Assemble Hydra Mechanical Shutoff Control
1. If necessary, make a replacement of dowels (2) and make sure they are 3.0 0.5 mm (.118 .020 in) above the surface of the housing assembly. 2. Put guide (1) in position in the housing assembly and make sure the dash mark on the end of the guide is in alignment with hole (3). Use Tooling (A) to install guide (1) in the housing assembly. 3. Put lever (5) in position in the housing assembly as shown and install shaft (4) to hold lever (5) in position. Make sure the end of the shaft is even (flush) 0.25 (.010 in) with the housing assembly. 4. Put the seat, spring (7) and seat (6) in position in cover (8) and put cover (8) and the gasket in position on the housing assembly. Install the bolts to hold the cover in position. 5. Install nut (15) and seat (10) on speed sensing valve (9). Make sure the dimension between the end of the valve and the nut face of the seat is 117.21 0.25 mm (4.614 .010 in) and tighten the nut. Put race (14), bearing (11) and race (13) in position on seat (10) and install ring (12) to hold these in position. 6. Install seat (16), spring (17) and speed sensing valve (9) on the housing assembly guide. 7. Put clean engine oil on O-ring seal (18) and put O-ring seal (18), plunger assembly (19), spring (20) and seat (21) in position in the housing assembly. Use Tool (B) to install snap ring (22) to hold the plunger assembly, the spring and seat in position. 8. If necessary, make a replacement of pin (24) and make sure pin (24) is 3.96 0.50 mm (.156 .020 in) above the bottom surface of the bore. 9.
Parts locking Volvo Penta:
1161053
1161053 Locking fluid
130S-C; 130SR-C, 130S; 130S-B; 130SR-A, 150S-C; 150SR-C, 150S; 150S-B; 150SR, 2001; 2001B; 2001AG, AQ115A; AQ115B; AQ130, D1-13; D1-13B; D1-20, D12D-A MG; D12D-E MG, D12D-A MH; D12D-B MH; D12D-C MH, D2-55; D2-55B; D2-55C, D2-75; D2-75B; D2-75C, D4-18
941338
941338 Locking wire
AD30A; AQAD30A; MD30A, AQ115A; AQ115B; AQ130, AQ120B; AQ125A; AQ140A, AQ125B, AQ131A; AQ131B; AQ131C, AQ145A; BB145A, AQ145B, AQ151A; AQ151B; AQ151C, AQ171A; AQ171C, AQ175A, AQ190A; AQ240A, AQ200B; AQ225B, AQ200C; AQ200D; AQ225C, AQ200D; AQ200F; 280B
827268
827268 Locking wire
230A; 230B; 250A, 251A, AD30A; AQAD30A; MD30A, AQ115A; AQ115B; AQ130, AQ120B; AQ125A; AQ140A, AQ125B, AQ131A; AQ131B; AQ131C, AQ145A; BB145A, AQ145B, AQ151A; AQ151B; AQ151C, AQ171A; AQ171C, AQ200D; AQ200F; 280B, AQ225D; AQ225E; AQ225F, AQ260A; AQ260B
825679
839252