20805531 Volvo.Penta O-ring


20805531 O-ring Volvo.Penta TAD650VE; TAD660VE O
20805531 O-ring Volvo Penta
Rating:
33

Buy O-ring 20805531 Volvo Penta genuine, new aftermarket parts with delivery

You can buy parts:

As an associate, we earn commssions on qualifying purchases through the links below
$10.99
 

28-06-2023

-: -
UMIRIKO Tire Covers Waterproof Daisy Ornament Spare Wheel Tire Covers 24'' for RV Trailer SUV Truck Camper Travel Trailer Accessories 20805531
[Four Sizes]: S: Diameter 24.41in Suitable for diameters 23-25.5 inches. M: Diameter 26.38in is suitable for 25.5-27.5 inches. L: Diameter 28.35in is suitable for 27.5-29.5 inches. XL: Diameter 30.71in is suitable for 29.5-31.4 inches. The width of each size wheel well is 9.8 inches. || [High-quality Material]: Made of silver-coated Oxford fabric, which has sun protection function, reduces the damage caused by the sun and protects the tires. || [Waterproof and Dustproof]: The fabric is waterproof, reducing the damage caused by dogs peeing on the tires, rain or other substances, and avoiding the shortening of the service life of the tires. A spare tire placed in the yard, using this tire cover can prevent leaves, mud, etc. from getting stuck in the wheel. || [Easy to install]: With elastic band and hook design, better wrapping, easy to install, and increase the stability of use. || [WIDE APPLICATIONS]: Perfectly compatible with tires for trailers, RVs, SUVs, trucks and many other models.
$11.99
 

28-06-2023

-: -
UMIRIKO Car Trash Can Daisy Ornament Hanging Car Garbage Bin Foldable, Leak-Proof, Waterproof S 20805531
SIZE: S: 8.66 x 8.66 x 5.9 INCH and M: 11 x 11 x 5.9 INCH || LEAK-PROOF AND WATERPROOF: This car trash can is made of Oxford cloth, which is waterproof. The interior is supported by a PE board, which makes the trash can more three-dimensional and stable, and can be placed on the floor of the car. || FOLDABLE AND HANGING: The trash can has an adjustable shoulder strap, which can be hung on the back of the seat. With a fixed snap, it can fix the garbage bag and prevent the garbage bag from being transferred into the trash can. It can be folded and stored when not in use. || MULTI-FUNCTIONAL: The waterproof and leak-proof car dumpster can store a variety of items, and can also store garbage bags. Keep the inside of your car neat and clean. || EASY WIPE AND REUSABLE: The inner layer is hot-pressed with PEVA material, Wipe or rinse to keep the trash can clean.
$10.99
 

15-03-2023

-: -
UMIRIKO Car Registration and Insurance Holder Leather Daisy Ornament Vehicle Glove Box Organizers, Case for Essential Documents, Driver License and Cards Car Essentials 20805531
[Leather Material]: soft and delicate, durable, wear-resistant, thin and gorgeous. || [Six Pockets]: This car registration and insurance holder is roomy and measures 9.5" x 5". There is 1 large pocket for important documents such as car insurance policies. 2 pockets for vehicle registration cards and 3 small pockets for driver's license or other valuable cards. || [Clear Pocket]: The internal card slot is made of transparent pvc material, and all documents can be easily seen after opening. || [GIFT]: The car document organizer with exquisite fashion patterns, maybe a good gift for yourself, lover, friends and family. || [FUN DESIGNS]: Our car registration and insurance clips come in many different fun designs, there is sure to be a favorite. Fits perfectly in your glove box or center console and is ideal for protecting important documents.

Compatible models:

TAD650VE; TAD660VE   Volvo.Penta

Volvo Penta entire parts catalog list:

TAD650VE; TAD660VE

Information:

2. Loosen the clamps (4) on each end of tube (3). Remove bolt (1) from clip. Remove tube (3).3. Remove tube assembly (2). 4. Remove tube assemblies (6) and (7) from engine.5. Disconnect temperature sending unit (5) from the cylinder head. 6. Remove regulator housing (9) and the water temperature regulator from the cylinder head.7. Remove two bolts (8) and gasket. 8. Fasten a hoist to cylinder head (10). 9. Remove bolts (11) that hold the cylinder head to the cylinder block. Remove the cylinder head and gasket. The weight of the cylinder head is 150 lb. (68 kg). When the cylinder head is removed, a new spacer plate gasket must be installed. See REMOVE AND INSTALL SPACER PLATE.Install Cylinder Head
When the cylinder head is removed, a new spacer plate gasket must be installed. See REMOVE AND INSTALL SPACER PLATE. 1. Clean the surfaces of the cylinder head and the cylinder block that make contact with each other. Make sure the surfaces are clean and dry. Install a new, dry gasket (3) on the cylinder block.2. Make sure the gasket for elbow (2) is in position.3. Fasten a hoist to cylinder head (1) and put it in position on the cylinder block.4. Put 5P3931 Anti-Seize Compound on all the head bolts and rocker shaft bolts. Install the head bolts and washers that hold the head in place. Do not tighten bolts at this time. 5. Install push rods (5) and rocker shaft assembly (4). Install the bolts and washers that hold the rocker shaft assembly in place. 6. Tighten the bolts as follows: a) Tighten bolts 1 through 18 in number sequence to a torque of 115 lb.ft. (155 N m).b) Tighten bolts 1 through 18 again in number sequence to a torque of 185 13 lb.ft. (250 17 N m).c) Tighten bolts 1 through 18 again in number sequence (hand tighten only) to a torque of 185 13 lb.ft. (250 17 N m).d) Tighten bolts A through E in letter sequence to a torque of 32 lb.ft. (43 7 N m).e) Tighten bolts A through E again in letter sequence to a torque of 32 lb.ft. (43 7 N m).7. Make adjustments until the intake valve clearance is .015 in. (0.38 mm) and the exhaust valve clearance is .025 in. (0.64 mm). See ENGINE VALVE LASH as shown in LUBRICATION AND MAINTENANCE GUIDE. Tighten the locknuts for the adjustment screws to a torque of 21 5 lb.ft. (29 7 N m). 8. Install two bolts (7) in elbow.9. Install the water temperature regulator (8) in the cylinder head with the spring toward the inside as shown.
If the water temperature regulator is installed wrong, it will cause the engine to overheat.
10. Install gasket (9) and housing (6) on cylinder. 11. Put tube (10) in position on the engine. Slide hoses (12) in place. Tighten clamps (11) on each end of tube. Install the bolt that holds the clip to the fuel tank. 12. Install the temperature sending unit (13).13. Install tube assemblies (14) and (15) to the air compressor.end by:a) install exhaust manifoldb) install fuel injection linesc) install air cleaner housing


Parts o Volvo Penta:

20405535
O-ring
20405535 O-ring
D5A-T; D5A-TA; D5A-B TA, D5A-T; D5A-TA; D5A-B TA, TAD520GE; TAD720GE; TAD721GE, TAD520VE; TAD720VE; TAD721VE, TAD550GE; TAD551GE; TAD750GE, TAD650VE; TAD660VE, TAD734GE, TAD750VE; TAD760VE, TD520GE; TAD530GE; TAD531GE, TD520VE; TD720VE
20405822
 
20405822 O-ring
D5A-T; D5A-TA; D5A-B TA, D5A-T; D5A-TA; D5A-B TA, TAD520GE; TAD720GE; TAD721GE, TAD520VE; TAD720VE; TAD721VE, TAD550GE; TAD551GE; TAD750GE, TAD560VE; TAD561VE; TAD761VE, TAD650VE; TAD660VE, TAD734GE, TAD750VE; TAD760VE, TD420VE; TAD420VE; TAD620VE, T
20405599
 
20405599 O-ring
D5A-T; D5A-TA; D5A-B TA, D5A-T; D5A-TA; D5A-B TA, TAD520GE; TAD720GE; TAD721GE, TAD520VE; TAD720VE; TAD721VE, TAD550GE; TAD551GE; TAD750GE, TAD560VE; TAD561VE; TAD761VE, TAD650VE; TAD660VE, TAD734GE, TAD750VE; TAD760VE, TD420VE; TAD420VE; TAD620VE, T
20798827
 
20798827 O-ring
TAD550GE; TAD551GE; TAD750GE, TAD650VE; TAD660VE, TAD750VE; TAD760VE
20459193
 
20459193 O-ring
TAD650VE; TAD660VE, TD420VE; TAD420VE; TAD620VE
20792162
O-ring
20792162 O-ring
TAD650VE; TAD660VE, TAD734GE, TAD750VE; TAD760VE
20502536
 
20502536 O-ring
TAD650VE; TAD660VE, TAD750VE; TAD760VE
20799838
 
20799838 O-ring
TAD650VE; TAD660VE
Back to top