20805465 Oil line Volvo.Penta
TAD750VE; TAD760VE
Oil
Price: query
Rating:
You can buy parts:
As an associate, we earn commssions on qualifying purchases through the links below
$11.99
21-09-2023
-: -
UMIRIKO Car Trash Can Cactus Hanging Car Garbage Bin Foldable, Leak-Proof, Waterproof S 20805465
SIZE: S: 8.66 x 8.66 x 5.9 INCH and M: 11 x 11 x 5.9 INCH || LEAK-PROOF AND WATERPROOF: This car trash can is made of Oxford cloth, which is waterproof. The interior is supported by a PE board, which makes the trash can more three-dimensional and stable, and can be placed on the floor of the car. || FOLDABLE AND HANGING: The trash can has an adjustable shoulder strap, which can be hung on the back of the seat. With a fixed snap, it can fix the garbage bag and prevent the garbage bag from being transferred into the trash can. It can be folded and stored when not in use. || MULTI-FUNCTIONAL: The waterproof and leak-proof car dumpster can store a variety of items, and can also store garbage bags. Keep the inside of your car neat and clean. || EASY WIPE AND REUSABLE: The inner layer is hot-pressed with PEVA material, Wipe or rinse to keep the trash can clean.
SIZE: S: 8.66 x 8.66 x 5.9 INCH and M: 11 x 11 x 5.9 INCH || LEAK-PROOF AND WATERPROOF: This car trash can is made of Oxford cloth, which is waterproof. The interior is supported by a PE board, which makes the trash can more three-dimensional and stable, and can be placed on the floor of the car. || FOLDABLE AND HANGING: The trash can has an adjustable shoulder strap, which can be hung on the back of the seat. With a fixed snap, it can fix the garbage bag and prevent the garbage bag from being transferred into the trash can. It can be folded and stored when not in use. || MULTI-FUNCTIONAL: The waterproof and leak-proof car dumpster can store a variety of items, and can also store garbage bags. Keep the inside of your car neat and clean. || EASY WIPE AND REUSABLE: The inner layer is hot-pressed with PEVA material, Wipe or rinse to keep the trash can clean.
$19.99
27-07-2023
-: -
UMIRIOKO Cactus Car Windshield Sun Shade with Storage Pouch, Foldable Sun Visor Shield Cover Automotive UV Protection S 20805465
[BLOCKING UV RAYS]: Made of high-grade vinyl fabric, which is thin and opaque, and has the functions of blocking UV rays, shading, heat insulation, and waterproofing. || [PROTECT THE OBJECTS IN THE CAR]: Strong direct sunlight will cause damage to the accessories and seats in the car. Our car windshield sun visor with black glue can effectively block sunlight and ultraviolet rays, and protect the contents of your car to a certain extent. It also alleviates the high temperature caused by direct sunlight. || [FOLDABLE]: Our car window visor is designed with galvanized elastic flat wire, which can be easily folded and stored in our gift storage bag. Take it out of the bag and the visor will automatically restore. Easy to store and beautifully packaged. || [FIRM INSTALLATION]: The top of the visor is stickable, which can be fixed the rearview mirror. Avoid falling and protect your car interior for a long time. || [USAGE SCENARIO]: Two sizes are available, which can be selected according to the size of your car window. It can be used on the windshield of the front and rear of the car.
[BLOCKING UV RAYS]: Made of high-grade vinyl fabric, which is thin and opaque, and has the functions of blocking UV rays, shading, heat insulation, and waterproofing. || [PROTECT THE OBJECTS IN THE CAR]: Strong direct sunlight will cause damage to the accessories and seats in the car. Our car windshield sun visor with black glue can effectively block sunlight and ultraviolet rays, and protect the contents of your car to a certain extent. It also alleviates the high temperature caused by direct sunlight. || [FOLDABLE]: Our car window visor is designed with galvanized elastic flat wire, which can be easily folded and stored in our gift storage bag. Take it out of the bag and the visor will automatically restore. Easy to store and beautifully packaged. || [FIRM INSTALLATION]: The top of the visor is stickable, which can be fixed the rearview mirror. Avoid falling and protect your car interior for a long time. || [USAGE SCENARIO]: Two sizes are available, which can be selected according to the size of your car window. It can be used on the windshield of the front and rear of the car.
$10.99
26-06-2023
-: -
UMIRIKO Tire Covers Waterproof Cactus Spare Wheel Tire Covers 30'' for RV Trailer SUV Truck Camper Travel Trailer Accessories 20805465
[Four Sizes]: S: Diameter 24.41in Suitable for diameters 23-25.5 inches. M: Diameter 26.38in is suitable for 25.5-27.5 inches. L: Diameter 28.35in is suitable for 27.5-29.5 inches. XL: Diameter 30.71in is suitable for 29.5-31.4 inches. The width of each size wheel well is 9.8 inches. || [High-quality Material]: Made of silver-coated Oxford fabric, which has sun protection function, reduces the damage caused by the sun and protects the tires. || [Waterproof and Dustproof]: The fabric is waterproof, reducing the damage caused by dogs peeing on the tires, rain or other substances, and avoiding the shortening of the service life of the tires. A spare tire placed in the yard, using this tire cover can prevent leaves, mud, etc. from getting stuck in the wheel. || [Easy to install]: With elastic band and hook design, better wrapping, easy to install, and increase the stability of use. || [WIDE APPLICATIONS]: Perfectly compatible with tires for trailers, RVs, SUVs, trucks and many other models.
[Four Sizes]: S: Diameter 24.41in Suitable for diameters 23-25.5 inches. M: Diameter 26.38in is suitable for 25.5-27.5 inches. L: Diameter 28.35in is suitable for 27.5-29.5 inches. XL: Diameter 30.71in is suitable for 29.5-31.4 inches. The width of each size wheel well is 9.8 inches. || [High-quality Material]: Made of silver-coated Oxford fabric, which has sun protection function, reduces the damage caused by the sun and protects the tires. || [Waterproof and Dustproof]: The fabric is waterproof, reducing the damage caused by dogs peeing on the tires, rain or other substances, and avoiding the shortening of the service life of the tires. A spare tire placed in the yard, using this tire cover can prevent leaves, mud, etc. from getting stuck in the wheel. || [Easy to install]: With elastic band and hook design, better wrapping, easy to install, and increase the stability of use. || [WIDE APPLICATIONS]: Perfectly compatible with tires for trailers, RVs, SUVs, trucks and many other models.
Number on catalog scheme: 2
Compatible models:
TAD750VE; TAD760VE
Volvo.Penta
Volvo Penta entire parts catalog list:
Information:
1. Remove elbow (1) from the oil pump.2. Bend the lock down and remove the bolt and lock that hold the suction bell assembly to the oil pan plate. 3. Bend the locks down and remove bolts (3) and the locks that hold oil pump (4) in place. Remove oil pump (4).
The oil pump idler gear is free to fall when the oil pump is removed.
Install Oil Pump
This operation was done on an earlier machine. 1. Put oil pump (1) in position on the engine and install the locks and bolts (2) that hold the oil pump in place. Be sure the idler gear is engaged with the crankshaft gear before bolts (2) are tightened. 2. Install the bolt and lock that hold suction bell assembly (4) to the oil pan plate.3. Put the gasket in place and install elbow (3).end by: a) install oil panDisassemble Oil Pump
start by: a) remove oil pump 1. Remove idler gear (2). Remove bearing from gear with tooling (B) and a press.2. Remove suction bell (1).3. Remove the bolt and the washer from the oil pump drive gear. 4. Remove the drive gear from the shaft with tooling (A).5. Remove the key from the pump shaft.6. Remove bolts (3) from the pump body. 7. Remove body (8), two gears (7), keys and spacer (4) from the pump.8. Remove two shafts (5) and the gears.9. Remove bolts (6), the cover and the pressure relief valve from the body. 10. Remove the bearings from the oil pump body assembly and the scavenge pump body assembly with tooling (C).Assemble Oil Pump
1. Install the bearings in the scavenge pump body assembly with tooling (A) and a press as follows: a) Put bearings (1) in position on the inside of the scavenge pump body assembly with the chamfer on the bearing toward the outside of the pump body. Install the bearing until it is .060 in. (1.52 mm) below the inside machined surface of the scavenge pump body assembly. Make sure the joints in the bearings are at an angle of 30° 15° from the center line through the bores in the scavenge pump body and toward the outlet passage of the pump. The outlet passage has a cavity between the bearing bores. 2. Install the bearings in oil pump body assembly with tooling (A) and a press as follows: a) Put bearings (2) in position on the inside of the oil pump body assembly with the chamfer on the bearings toward the outside of the pump body. Install the bearings until they are even with the outside of the pump body. Make sure the joints in the bearings are at an angle of 30° 15° from the centerline through the bearing bores and toward the outlet passage of the pump. The outlet passage has a cavity between the bearing bores.3. Check the condition of the relief valve. Check the condition and specifications for all the parts of the oil pump before it is assembled. See OIL PUMP in SPECIFICATIONS.4. Put clean engine oil on all the parts of the oil pump. 5. Install pressure relief valve (3), cover (4) and bolt (5) in the oil pump body assembly.6. Install gears and shafts (6) in the oil pump body assembly. 7. Install spacer (7) and the two keys in shafts (6). 8. Install two gears and scavenge pump body assembly (8).9. Install key (9), drive gear (11), the washer and bolt (10). Tighten the bolt to a torque of 32 5 lb.ft. (43 7 N m). 10. Install bearing (12) in idler gear (13) with tooling (B) and a press until it is even with the outside surface of the gear.11. Install idler gear (13) on the pump.12. Put the gasket and suction bell assembly (14) in position and install the locks and bolts (15) that hold it. Bend the locks up.
The oil pump must turn freely by hand after it is assembled.
end by: a) install oil pump
The oil pump idler gear is free to fall when the oil pump is removed.
Install Oil Pump
This operation was done on an earlier machine. 1. Put oil pump (1) in position on the engine and install the locks and bolts (2) that hold the oil pump in place. Be sure the idler gear is engaged with the crankshaft gear before bolts (2) are tightened. 2. Install the bolt and lock that hold suction bell assembly (4) to the oil pan plate.3. Put the gasket in place and install elbow (3).end by: a) install oil panDisassemble Oil Pump
start by: a) remove oil pump 1. Remove idler gear (2). Remove bearing from gear with tooling (B) and a press.2. Remove suction bell (1).3. Remove the bolt and the washer from the oil pump drive gear. 4. Remove the drive gear from the shaft with tooling (A).5. Remove the key from the pump shaft.6. Remove bolts (3) from the pump body. 7. Remove body (8), two gears (7), keys and spacer (4) from the pump.8. Remove two shafts (5) and the gears.9. Remove bolts (6), the cover and the pressure relief valve from the body. 10. Remove the bearings from the oil pump body assembly and the scavenge pump body assembly with tooling (C).Assemble Oil Pump
1. Install the bearings in the scavenge pump body assembly with tooling (A) and a press as follows: a) Put bearings (1) in position on the inside of the scavenge pump body assembly with the chamfer on the bearing toward the outside of the pump body. Install the bearing until it is .060 in. (1.52 mm) below the inside machined surface of the scavenge pump body assembly. Make sure the joints in the bearings are at an angle of 30° 15° from the center line through the bores in the scavenge pump body and toward the outlet passage of the pump. The outlet passage has a cavity between the bearing bores. 2. Install the bearings in oil pump body assembly with tooling (A) and a press as follows: a) Put bearings (2) in position on the inside of the oil pump body assembly with the chamfer on the bearings toward the outside of the pump body. Install the bearings until they are even with the outside of the pump body. Make sure the joints in the bearings are at an angle of 30° 15° from the centerline through the bearing bores and toward the outlet passage of the pump. The outlet passage has a cavity between the bearing bores.3. Check the condition of the relief valve. Check the condition and specifications for all the parts of the oil pump before it is assembled. See OIL PUMP in SPECIFICATIONS.4. Put clean engine oil on all the parts of the oil pump. 5. Install pressure relief valve (3), cover (4) and bolt (5) in the oil pump body assembly.6. Install gears and shafts (6) in the oil pump body assembly. 7. Install spacer (7) and the two keys in shafts (6). 8. Install two gears and scavenge pump body assembly (8).9. Install key (9), drive gear (11), the washer and bolt (10). Tighten the bolt to a torque of 32 5 lb.ft. (43 7 N m). 10. Install bearing (12) in idler gear (13) with tooling (B) and a press until it is even with the outside surface of the gear.11. Install idler gear (13) on the pump.12. Put the gasket and suction bell assembly (14) in position and install the locks and bolts (15) that hold it. Bend the locks up.
The oil pump must turn freely by hand after it is assembled.
end by: a) install oil pump
Parts oil Volvo Penta:
3831236
3831236 Oil filter
D5A-T; D5A-TA; D5A-B TA, D5A-T; D5A-TA; D5A-B TA, TAD520GE; TAD720GE; TAD721GE, TAD520VE; TAD720VE; TAD721VE, TAD650VE; TAD660VE, TAD750VE; TAD760VE, TD420VE; TAD420VE; TAD620VE, TD520GE; TAD530GE; TAD531GE, TD520VE; TD720VE
20715681
20715681 Oil cooler
D5A-T; D5A-TA; D5A-B TA, D5A-T; D5A-TA; D5A-B TA, TAD520GE; TAD720GE; TAD721GE, TAD520VE; TAD720VE; TAD721VE, TAD550GE; TAD551GE; TAD750GE, TAD750VE; TAD760VE, TD520GE; TAD530GE; TAD531GE
20450980
20450980 Oil line
D5A-T; D5A-TA; D5A-B TA, D5A-T; D5A-TA; D5A-B TA, TAD520VE; TAD720VE; TAD721VE, TAD750VE; TAD760VE
21640514
21134562
20971701
20971683
20971707