824513 Oil cooler, oil cooler Volvo.Penta
AQ115A; AQ115B; AQ130
Oil
Price: query
Rating:
You can buy parts:
As an associate, we earn commssions on qualifying purchases through the links below
$85.96
29-03-2024
US: HAISILUFEI
FAMIROSA Garden Raised Bed 39.4"x39.4"x7.3" Corten Steel,2.15 KG,824513
FAMIROSA Color: Rusty || Material: Corten steel || Dimensions: 39.4" x 39.4" x 7.3" (W x D x H) || Assembly required: Yes || 100% Satisfaction Service: We guarantee customers can return products without reason within 30 days. And we will make a full refund or replacement after the damaged item is returned. Our manufacturer provides free replacement services for 12 months from the date of purchase. If you have any problem with your order, pls feel free to contact us by using Amazon email, our professional customer support team will deal with your problem within 24 hours!
FAMIROSA Color: Rusty || Material: Corten steel || Dimensions: 39.4" x 39.4" x 7.3" (W x D x H) || Assembly required: Yes || 100% Satisfaction Service: We guarantee customers can return products without reason within 30 days. And we will make a full refund or replacement after the damaged item is returned. Our manufacturer provides free replacement services for 12 months from the date of purchase. If you have any problem with your order, pls feel free to contact us by using Amazon email, our professional customer support team will deal with your problem within 24 hours!
$86.99
29-03-2024
2.5353[1.14] pounds
US: Zatren
vidaXL Garden Raised Bed - Durable Corten Steel with Rusty Finish, Large Space for Plants, Vegetables & Flowers. Ideal for Garden/Patio Decor.
vidaXL Unrusted at Purchase: Product arrives with a normal metal color and the unique rusty patina develops over time || Open Bottom Design: Facilitates water drainage and breathability of plants, promoting overall plant health || Sufficient Space: Offers a large volume of 39.4"x39.4"x7.3" for soil, offering ample space for your favorite plants, vegetables, herbs, and flowers || ️ Decorative Function: Acts as an attractive decorative piece with its distinctive brown rusty color, enhancing the aesthetic appeal of your garden, balcony or patio || ️ Durable Material: Made of Corten steel that develops a rusty protective layer against corrosion without the need for paint. This weathering steel is durable and stands up to the test of time
vidaXL Unrusted at Purchase: Product arrives with a normal metal color and the unique rusty patina develops over time || Open Bottom Design: Facilitates water drainage and breathability of plants, promoting overall plant health || Sufficient Space: Offers a large volume of 39.4"x39.4"x7.3" for soil, offering ample space for your favorite plants, vegetables, herbs, and flowers || ️ Decorative Function: Acts as an attractive decorative piece with its distinctive brown rusty color, enhancing the aesthetic appeal of your garden, balcony or patio || ️ Durable Material: Made of Corten steel that develops a rusty protective layer against corrosion without the need for paint. This weathering steel is durable and stands up to the test of time
A-Premium Power Window Lift Motor Compatible with Hyundai Tiburon 2003-2008, Front Driver and Passenger Side, 2-PC Set
A-Premium [Directly Fit]: OE Replacement 2 pins window motor directly fit. || [Perfect Fitment]: Compatible with Hyundai Tiburon 2003-2008---Front Left and Right, Driver and Passenger Side || [Superior Quality]: Made of premium copper and high strength steel, durable window regulator motor. Besides, with the powerful center, the performance of window motors is more reliable. These will help your save both money and time in the long run. || [Reference Number]: The A-Premium Power Window Motor's reference number: 742718, 742-718, 824502C000, 82450-2C000, 474513, 824513, PPWMO1433L, 742719, 742-719, 824602C000, 82460-2C000, 474514, 824514, PPWMO1434R. Before placing an order, verify that the part is Compatible with your vehicle using the compatibility system. || [Customer Support]: 1 Year Unlimited-mileage Quality Guarantee; Being sturdy and brand-new, this window motor is the ideal replacement. Please get in touch with us at any time if the product has any quality issues, such as damage or isn't appropriate for your automobile.
A-Premium [Directly Fit]: OE Replacement 2 pins window motor directly fit. || [Perfect Fitment]: Compatible with Hyundai Tiburon 2003-2008---Front Left and Right, Driver and Passenger Side || [Superior Quality]: Made of premium copper and high strength steel, durable window regulator motor. Besides, with the powerful center, the performance of window motors is more reliable. These will help your save both money and time in the long run. || [Reference Number]: The A-Premium Power Window Motor's reference number: 742718, 742-718, 824502C000, 82450-2C000, 474513, 824513, PPWMO1433L, 742719, 742-719, 824602C000, 82460-2C000, 474514, 824514, PPWMO1434R. Before placing an order, verify that the part is Compatible with your vehicle using the compatibility system. || [Customer Support]: 1 Year Unlimited-mileage Quality Guarantee; Being sturdy and brand-new, this window motor is the ideal replacement. Please get in touch with us at any time if the product has any quality issues, such as damage or isn't appropriate for your automobile.
Number on catalog scheme: 13
Compatible models:
AQ115A; AQ115B; AQ130
Volvo.Penta
Volvo Penta entire parts catalog list:
- Cooling System, Induction- and Exhaust Manifold, Earlier Prod: A » 824513
- Cooling System, Induction- and Exhaust Manifold, Earlier Prod: B
- Cooling System, Induction- and Exhaust Manifold, Earlier Prod: C
- Cooling System Induction and Exhaust Manifold, Later Prod: A
- Cooling System Induction and Exhaust Manifold, Later Prod: B
- Cooling System Induction and Exhaust Manifold, Later Prod: C
- Cooling System Induction and Exhaust Manifold, Later Prod: D
- Cooling System, Induction- and Exhaust Manifold: A
- Cooling System, Induction- and Exhaust Manifold: B
- Cooling System, Induction- and Exhaust Manifold: C
- Cooling System, Induction- and Exhaust Manifold
- Oil Cooler: 824513
Information:
6. Remove washer (7) from the inside of the drive housing.7. Remove bolt (9) and washer to remove clip (8) from the drive housing.8. Remove cover (11) from the drive housing.9. Remove all of the bolts that hold the oil pan to the engine. Install 3/8" - 16 NC guide bolts in each side of the oil pan. Fasten a hoist to the engine and lift the engine approximately 12 mm (0.5 in) off of the oil pan. Put two 50 mm wide x 100 mm long x 6 mm thick (2 in. wide x 4 in. long x 1/4 in. thick) plates in position between the cylinder block and the oil pan on each side of the engine. Lower the engine on the plates and remove the hoist. The weight of the 3512 Engine is approximately 5443 kg (12,000 lb). The weight of the 3508 Engine is 4445 kg (9800 lb.).
CAUTION Fuel control linkage (10) must be moved for clearance to pull the front drive housing from the engine or damage to parts can be the result.
10. Fasten a hoist to front drive housing (12) with tooling (A). Remove bolts (13) and the remainder of the bolts that hold housing (12) in position. Remove front drive housing (12) from the engine. The weight of the housing is 209 kg (460 lb). INSTALL FRONT DRIVE HOUSING
1. Put the housing gasket in position on the front of the cylinder block. Install two 5/8" - 11 NC guide bolts (1) in the cylinder block.2. Fasten a hoist to front drive housing (2) with tooling (A). Put housing (2) in position on the guide bolts and install the bolts to hold it in position. Remove the guide bolts and install the remainder of the bolts. Tighten all of the bolts evenly and cut the housing gasket even with the bottom of the cylinder block.3. Fasten a hoist to the engine and lift the engine enough to remove the plates between the cylinder block and the oil pan. If the oil pan gasket is damaged, the engine will have to be removed from the oil pan to make a replacement of the gasket. Lower the engine on the oil pan and remove the guide bolts of the oil pan. Install all of the bolts that hold the oil pan to the engine.4. Put clean engine oil on the O-ring seals and install cover (3) on the drive housing.5. Put washer (4) in position inside the drive housing. 6. Use tooling (B) and a press to install the bearing in idler gear (5). Check the bore in the bearing after assembly. The bore in the bearing must be 90.00 0.06 mm (3.543 .002 in.).7. Put clean engine oil on the O-ring seal on shaft (6). Install idler gear (5) and shaft (6) in the front drive housing.8. Make sure the gasket and seals are in position and install aftercooler water line (7) on the engine. Install clip (8) on the drive housing.9. Install oil tube (9) on the engine.10. Fasten a hoist to support (10) with tooling (A) and put it in position on the front drive housing. Install the bolts to hold the support in position. Anytime the front crankshaft seal and wear sleeve are removed a new seal and wear sleeve must be installed.end by:a) install oil filter housingb) install crankcase breatherc) install front crankshaft seal and wear sleeved) install accessory drive (front)e) install governor drive
CAUTION Fuel control linkage (10) must be moved for clearance to pull the front drive housing from the engine or damage to parts can be the result.
10. Fasten a hoist to front drive housing (12) with tooling (A). Remove bolts (13) and the remainder of the bolts that hold housing (12) in position. Remove front drive housing (12) from the engine. The weight of the housing is 209 kg (460 lb). INSTALL FRONT DRIVE HOUSING
1. Put the housing gasket in position on the front of the cylinder block. Install two 5/8" - 11 NC guide bolts (1) in the cylinder block.2. Fasten a hoist to front drive housing (2) with tooling (A). Put housing (2) in position on the guide bolts and install the bolts to hold it in position. Remove the guide bolts and install the remainder of the bolts. Tighten all of the bolts evenly and cut the housing gasket even with the bottom of the cylinder block.3. Fasten a hoist to the engine and lift the engine enough to remove the plates between the cylinder block and the oil pan. If the oil pan gasket is damaged, the engine will have to be removed from the oil pan to make a replacement of the gasket. Lower the engine on the oil pan and remove the guide bolts of the oil pan. Install all of the bolts that hold the oil pan to the engine.4. Put clean engine oil on the O-ring seals and install cover (3) on the drive housing.5. Put washer (4) in position inside the drive housing. 6. Use tooling (B) and a press to install the bearing in idler gear (5). Check the bore in the bearing after assembly. The bore in the bearing must be 90.00 0.06 mm (3.543 .002 in.).7. Put clean engine oil on the O-ring seal on shaft (6). Install idler gear (5) and shaft (6) in the front drive housing.8. Make sure the gasket and seals are in position and install aftercooler water line (7) on the engine. Install clip (8) on the drive housing.9. Install oil tube (9) on the engine.10. Fasten a hoist to support (10) with tooling (A) and put it in position on the front drive housing. Install the bolts to hold the support in position. Anytime the front crankshaft seal and wear sleeve are removed a new seal and wear sleeve must be installed.end by:a) install oil filter housingb) install crankcase breatherc) install front crankshaft seal and wear sleeved) install accessory drive (front)e) install governor drive
Parts oil Volvo Penta:
1266286
1266286 Oil filter
251A, AD30A; AQAD30A; MD30A, AQ115A; AQ115B; AQ130, AQ120B; AQ125A; AQ140A, AQ125B, AQ131A; AQ131B; AQ131C, AQ145A; BB145A, AQ145B, AQ151A; AQ151B; AQ151C, AQ171A; AQ171C, MD31A; TMD31A; TMD31B, MD31A; TMD31B; TAMD31B
843114
843114 Oil bilge pump
230A; 230B; 250A, 251A, 430; 430A; 430B, 500; 500A; 501A, 571A, 740A; BB740A, AD30A; AQAD30A; MD30A, AD31D; AD31D-A; AD31XD, AD31L-A; AD31P-A; AD41L-A, AD41D; D41D; TAMD41D, AQ115A; AQ115B; AQ130, AQ120B; AQ125A; AQ140A, AQ125B, AQ131A; AQ131B; AQ131
3551925
3551925 Oil
AD30A; AQAD30A; MD30A, AQ115A; AQ115B; AQ130, AQ200B; AQ225B, AQ200C; AQ200D; AQ225C, AQ200D; AQ200F; 280B, AQ260A; AQ260B; BB260A, AQ290A, D120A; D120AK; TD120A, D42A; D42A PP, MB10A, MD100A; TMD100A; TMD100AK, MD11; MD11C; MD11D, MD120A; MD120AK; T
843410
843410 Oil bilge pump
AD31D; AD31D-A; AD31XD, AD31L-A; AD31P-A; AD41L-A, AD41D; D41D; TAMD41D, AQ115A; AQ115B; AQ130, AQD70D; TAMD70D; TAMD70E, D1-13; D1-13B; D1-20, D11A-A; D11A-B; D11A-C, D11B1-A MP; D11B2-A MP, D11B3-A MP; D11B4-A MP, D12D-A MG; D12D-E MG, D12D-A MH; D
826771
418432
1218706
804207
