21427730 Pump Volvo.Penta
7.4GiPEFS; 7.4GSiPEFS; 8.2GSiPEFS
Pump
Price: query
Rating:
You can buy parts:
As an associate, we earn commssions on qualifying purchases through the links below
$281.46
07-01-2024
0.0022[0.00] pounds
CN: ying yings shop
INDMAR 3858115 Marine Raw Water Sea Impeller Pump Housing Compatible for Volvo Penta, V6, V8, 4.3L, 5.0L, 5.7L, Also Replaces21427729, 21427730
INDMAR 1. In accordance with international auto parts standards, the use of high-quality materials for design and assembly, the use of the most advanced gear and cycloidal technology, reliable performance, no leakage, coating seal, to provide excellent quality, help to extend the service life of the engine. || 2. Corrosion-resistant cast iron or aluminum body construction provides additional strength and long-lasting durability. || 3. Control the flow of coolant through the radiator so that the engine can reach and maintain its normal operating temperature. || 4. With uniform wall parts, smooth coolant flow cavities and channel channels, efficient pump operation, optimal coolant circulation and maximum cooling can be achieved. || 5. Pressurize the coolant to ensure its circulation in the cooling system, and the water is constantly circulating in the radiator engine block to take away the heat and ensure that the engine is not hot.
INDMAR 1. In accordance with international auto parts standards, the use of high-quality materials for design and assembly, the use of the most advanced gear and cycloidal technology, reliable performance, no leakage, coating seal, to provide excellent quality, help to extend the service life of the engine. || 2. Corrosion-resistant cast iron or aluminum body construction provides additional strength and long-lasting durability. || 3. Control the flow of coolant through the radiator so that the engine can reach and maintain its normal operating temperature. || 4. With uniform wall parts, smooth coolant flow cavities and channel channels, efficient pump operation, optimal coolant circulation and maximum cooling can be achieved. || 5. Pressurize the coolant to ensure its circulation in the cooling system, and the water is constantly circulating in the radiator engine block to take away the heat and ensure that the engine is not hot.
3858115 Raw Water Sea Impeller Pump Housing for Volvo Penta, V6, V8, 4.3L, 5.0L, 5.7L, Also Replaces 21214599, 21214601, 21427729, 21427730, 21214596, 3858229
sixcow 【Perfect Fit】 The Raw Water Sea Impeller Pump Housing for Volvo Penta is compatible with Volvo Penta Sea water Boat V8 V6 Engines 3.0L, 4.3L, 5.0L, 5.7L, 7.4L, 8.1L, 8.2L. Also fits for Volvo Penta 4.3, 5.0, 5.7 GI/GXI/LXI/XI/GIL/GXIL/GSIL & More. Perfectly fits for Volvo Penta Raw Water Sea pumps mounted on crankshafts prior to 2005. Replaces part numbers: 3858115, 21214601, 21214599, 21427729, 21427730, 21214596, 3858229. || 【Solve Water Leakage Issues】 Upgrade the original worn out impeller housing with poor sealing. Direct replacement solves your water leakage problems. Newer version with no plastic ends that could leak or break. Improve water circulation. Take away the heat from the engine and ensure that the engine temperature is not high. Easy installation and save your charge. || 【Built to Last】 Made of high strength brass and rubber, with good friction reduction performance and high corrosion resistance, durable. Durable one-piece seal ensure leak-free performance of the pump housing. Vibration polishing treatment makes the heavy duty marine grade casing brighter and corrosion-free. || 【What You Get】 Your package included Housing (P/N 3858115) X1, Impeller Kit (P/N 3862567, 21213660, 21951348) X1, O-Ring (P/N 3858938) X1. Please note that the pump is not included. || 【100% Satisfaction Guarantee】 Your satisfaction is our priority. We strive to give our customers excellent service. All Sixcow products support 30-Day money-back guarantee, 12-Month warranty for quality-related issues. Simply return it for your warranty.
sixcow 【Perfect Fit】 The Raw Water Sea Impeller Pump Housing for Volvo Penta is compatible with Volvo Penta Sea water Boat V8 V6 Engines 3.0L, 4.3L, 5.0L, 5.7L, 7.4L, 8.1L, 8.2L. Also fits for Volvo Penta 4.3, 5.0, 5.7 GI/GXI/LXI/XI/GIL/GXIL/GSIL & More. Perfectly fits for Volvo Penta Raw Water Sea pumps mounted on crankshafts prior to 2005. Replaces part numbers: 3858115, 21214601, 21214599, 21427729, 21427730, 21214596, 3858229. || 【Solve Water Leakage Issues】 Upgrade the original worn out impeller housing with poor sealing. Direct replacement solves your water leakage problems. Newer version with no plastic ends that could leak or break. Improve water circulation. Take away the heat from the engine and ensure that the engine temperature is not high. Easy installation and save your charge. || 【Built to Last】 Made of high strength brass and rubber, with good friction reduction performance and high corrosion resistance, durable. Durable one-piece seal ensure leak-free performance of the pump housing. Vibration polishing treatment makes the heavy duty marine grade casing brighter and corrosion-free. || 【What You Get】 Your package included Housing (P/N 3858115) X1, Impeller Kit (P/N 3862567, 21213660, 21951348) X1, O-Ring (P/N 3858938) X1. Please note that the pump is not included. || 【100% Satisfaction Guarantee】 Your satisfaction is our priority. We strive to give our customers excellent service. All Sixcow products support 30-Day money-back guarantee, 12-Month warranty for quality-related issues. Simply return it for your warranty.
3858115 All Metal Raw Water Sea Pump Impeller Housing with Impeller for Volvo Penta Engines V6, V8, 4.3L, 5.0L, 5.7L, Replaces to 21214599, 21214601, 21427729, 21427730, 21214596, 3858229
Yoursme 【GREAT APPLICATION】: Compatible with Volvo Penta 4.3, 5.0, 5.7 GI/GXI/LXI/XI/GIL/GXIL/GSIL & More. Perfectly fits for Volvo Penta Raw Water Sea pumps mounted on crankshafts prior to 2005. || 【MATCHING NUMBER】: Replace to 3858115. Also suitable for these following pump numbers: 21214599, 21214601, 21214596, 21427729, 21427730, 3858229 & all their preceding part numbers. || 【EXCELLENT FUNCTION】: The water pump makes the liquid enters the rapidly rotating impeller and is thrown out by centrifugal force; then the hot water in the engine is pumped into the water tank to make the engine run normally, and ensure that the engine is not at high temperature. New version with no plastic ends that could leak or break. || 【SUPERIOR MATERIAL】: Housing made of high quality Brass with sturdy and durable, impact resistance without deformation. Impeller and O-ring natural manufactured from natural rubber, which resists Oxidation, wear, tear, anti-seawater corrosion and solvents. || 【SATISFACTION GUARANTEE】: We to give our customers the best products and services, we provide friendly 1-year’s warranty support and easy-to-reach Customer Service to make sure your investment! If you hava any quesyions about this Raw Water Sea Pump Impeller Housing, please contact us without hesitate.
Yoursme 【GREAT APPLICATION】: Compatible with Volvo Penta 4.3, 5.0, 5.7 GI/GXI/LXI/XI/GIL/GXIL/GSIL & More. Perfectly fits for Volvo Penta Raw Water Sea pumps mounted on crankshafts prior to 2005. || 【MATCHING NUMBER】: Replace to 3858115. Also suitable for these following pump numbers: 21214599, 21214601, 21214596, 21427729, 21427730, 3858229 & all their preceding part numbers. || 【EXCELLENT FUNCTION】: The water pump makes the liquid enters the rapidly rotating impeller and is thrown out by centrifugal force; then the hot water in the engine is pumped into the water tank to make the engine run normally, and ensure that the engine is not at high temperature. New version with no plastic ends that could leak or break. || 【SUPERIOR MATERIAL】: Housing made of high quality Brass with sturdy and durable, impact resistance without deformation. Impeller and O-ring natural manufactured from natural rubber, which resists Oxidation, wear, tear, anti-seawater corrosion and solvents. || 【SATISFACTION GUARANTEE】: We to give our customers the best products and services, we provide friendly 1-year’s warranty support and easy-to-reach Customer Service to make sure your investment! If you hava any quesyions about this Raw Water Sea Pump Impeller Housing, please contact us without hesitate.
Number on catalog scheme: 1
Compatible models:
7.4GiPEFS; 7.4GSiPEFS; 8.2GSiPEFS
Volvo.Penta
Volvo Penta entire parts catalog list:
Information:
Install Water Pump
Photos shown are on 3306.1. Put a new water pump elbow gasket in place and install water pump (1). Install the bolts and washer that hold the water pump and elbow in place.2. Put a thin layer of engine oil on seal (3).3. Put a new gasket between the exhaust manifold and tube (2) in position. Install tube (2) and bolts that hold the tube in place.4. Tighten the hose clamp on the hose to the oil cooler.5. Install the bolt and washer that hold the breather tube clip (4) in place.6. Connect the hose from the radiator to the water pump.7. Fill the cooling system with coolant to the correct level. Disassemble Water Pump
start by:a) remove water pump1. Remove cover (3) and gasket from water pump (1).2. Remove elbow (2) and gasket from water pump (1).3. Loosen bolt (5) .25 in. (6.35 mm). Hit (tap) the bolt with a soft hammer to remove impeller (4) from the shaft.4. Remove spring and seal assembly (7) from shaft (6).5. Turn the water pump over and remove bolt (8) and lockwasher.6. Remove O-ring seal (9) from the housing.7. Use tooling (A) to remove gear (11) and bearing (10) from the water pump.8. Remove bearing (10) from gear (11). 9. Remove snap ring (12) with tool (B).10. Remove bearing (14) and shaft (13) as a unit.11. Use tool (C) and a press to remove bearing (14) from the shaft.12. Remove the ceramic ring and seal (15) from the housing.13. Remove the lip type seal (16) from the housing with tooling (D). Assemble Water Pump
The seal must be installed with the lip toward the bearings.1. Install the lip type seal in housing (1) with tooling (A) to the bottom of the seal counterbore. Put a thin layer of engine oil on the lip of the seal.2. Use a press to install shaft (2) in bearing (3).3. Install the shaft and bearing (3) in housing (1).4. Install snap ring (4) in the housing with tool (B). 5. Install bearing (5) on gear (6).
When gear (6) is installed, make sure the pins on the gear engage the holes in the shaft.
6. Put gear (6) and bearing in position on the shaft and install washer and bolt.7. Install O-ring seal (7) on the housing.
Clean water only is permitted for use as a lubricant to make assembly easier. Do not damage or put hands on the wear surface of the carbon ring or the ceramic ring. Install the ceramic ring with the smoothest face of the ring toward the carbon seal assembly.
8. Put the ceramic ring (8) in position in the rubber seal. Use hand pressure and tool (which is with the replacement ring) to install the ceramic ring and rubber seal. 9. Remove the spring from the seal assembly (9). Use hand pressure and the tool (which is with the replacement ring) to install the seal assembly. Push seal assembly on the shaft until seal faces make light contact.10. Install spring (10) on the seal assembly.11. Put impeller (11) in position on the shaft.12. Install washer and bolt (12). Tighten the bolt to a torque of 28 1 lb.ft. (39 1 N m).13. Install a new gasket and cover (13) on the housing.14. Install a new gasket and elbow (14) on the housing.end by:a) install water pump
Photos shown are on 3306.1. Put a new water pump elbow gasket in place and install water pump (1). Install the bolts and washer that hold the water pump and elbow in place.2. Put a thin layer of engine oil on seal (3).3. Put a new gasket between the exhaust manifold and tube (2) in position. Install tube (2) and bolts that hold the tube in place.4. Tighten the hose clamp on the hose to the oil cooler.5. Install the bolt and washer that hold the breather tube clip (4) in place.6. Connect the hose from the radiator to the water pump.7. Fill the cooling system with coolant to the correct level. Disassemble Water Pump
start by:a) remove water pump1. Remove cover (3) and gasket from water pump (1).2. Remove elbow (2) and gasket from water pump (1).3. Loosen bolt (5) .25 in. (6.35 mm). Hit (tap) the bolt with a soft hammer to remove impeller (4) from the shaft.4. Remove spring and seal assembly (7) from shaft (6).5. Turn the water pump over and remove bolt (8) and lockwasher.6. Remove O-ring seal (9) from the housing.7. Use tooling (A) to remove gear (11) and bearing (10) from the water pump.8. Remove bearing (10) from gear (11). 9. Remove snap ring (12) with tool (B).10. Remove bearing (14) and shaft (13) as a unit.11. Use tool (C) and a press to remove bearing (14) from the shaft.12. Remove the ceramic ring and seal (15) from the housing.13. Remove the lip type seal (16) from the housing with tooling (D). Assemble Water Pump
The seal must be installed with the lip toward the bearings.1. Install the lip type seal in housing (1) with tooling (A) to the bottom of the seal counterbore. Put a thin layer of engine oil on the lip of the seal.2. Use a press to install shaft (2) in bearing (3).3. Install the shaft and bearing (3) in housing (1).4. Install snap ring (4) in the housing with tool (B). 5. Install bearing (5) on gear (6).
When gear (6) is installed, make sure the pins on the gear engage the holes in the shaft.
6. Put gear (6) and bearing in position on the shaft and install washer and bolt.7. Install O-ring seal (7) on the housing.
Clean water only is permitted for use as a lubricant to make assembly easier. Do not damage or put hands on the wear surface of the carbon ring or the ceramic ring. Install the ceramic ring with the smoothest face of the ring toward the carbon seal assembly.
8. Put the ceramic ring (8) in position in the rubber seal. Use hand pressure and tool (which is with the replacement ring) to install the ceramic ring and rubber seal. 9. Remove the spring from the seal assembly (9). Use hand pressure and the tool (which is with the replacement ring) to install the seal assembly. Push seal assembly on the shaft until seal faces make light contact.10. Install spring (10) on the seal assembly.11. Put impeller (11) in position on the shaft.12. Install washer and bolt (12). Tighten the bolt to a torque of 28 1 lb.ft. (39 1 N m).13. Install a new gasket and cover (13) on the housing.14. Install a new gasket and elbow (14) on the housing.end by:a) install water pump
Parts pump Volvo Penta:
3862483
3812694
3862488
3812698
21427729
