3853171 Volvo.Penta Screw

Table 1
Specifications for 347-1649 Engine Electronic Control Gp    
Callout     Part Number     Part Name     Specification Description    
14     124-3815     Bolt     Torque to...................
22 N m (195 lb in)    
16     365-1705     Nut     Torque to...................
28 N m (248 lb in)    
17     -     Nut     Torque to...................
43 N m (32 lb ft)    
23     -     Bolt     Torque to...................
6 N m (53 lb in)    
24     -     Bolt     Torque to...................
6 N m (53 lb in)    
25     232-1693     Bolt     Torque to...................
6.5 N m (59 lb in)    
26     -     Bolt     Torque to...................
6.5 N m (59 lb in)    
30     6I-0631     Bolt     Torque to...................
9 N m (80 lb in)    
32     6I-0631     Bolt     Torque to...................
9 N m (80 lb in)    
33     6I-0631     Bolt     Torque to...................
9 N m (80 lb in)    
37     6I-0631     Bolt     Torque to...................
9 N m (80 lb in)    
40     6I-0631     Bolt     Torque to...................
9 N m (80 lb in)    
42     6I-0631     Bolt     Torque to...................
9 N m (80 lb in)    
45     6I-0456     Bolt     Torque to...................
22 N m (195 lb in)    
47             Torque to...................
18 N m (159 lb in)    
50             Torque to...................
18 N m (159 lb in)    
54     278-5203     Spacer     Torque to...................
44 N m (32 lb ft)    Removal Procedure
Table 2
Required Tools    
Tool     Part Number     Part Description     Qty    
A     370-8376     Cap Kit     1    Ensure that all adjustments and repairs that are carried out to the fuel system are performed by authorized personnel that have the correct training.Before beginning ANY work on the fuel system, refer to Operation and Maintenance Manual, "General Hazard Information and High Pressure Fuel Lines" for safety information. Refer to System Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.
Turn the battery disconnect switch to the OFF position.
Turn the fuel supply to the OFF position.
If necessary, remove the secondary filter assembly. Refer to Disassembly and Assembly, "Fuel Filter Base" for the correct procedure.
If necessary, remove the primary fuel filter assembly. Refer to Disassembly and Assembly, "Water Separator and Fuel Filter (Primary)" for the correct procedure.
If necessary, remove the dipstick tube assembly. Refer to Disassembly and Assembly, "Engine Oil Pan" for the correct procedure.
Illustration 1 g02601037
Illustration 2 g02603416
Illustration 3 g02603456
Cut cable strap (2) and cable strap (7) from plastic tube assembly (1) .
Remove plastic tube assembly (1) from the crankcase breather canister. Refer to Disassembly and Assembly, "Crankcase Breather" for the correct procedure.
Disconnected harness assembly (3) from the fuel temperature sensor. Refer to Disassembly and Assembly, "Fuel Temperature Sensor" for the correct procedure.
Disconnected harness assembly (4) from the engine oil pressure sensor. Refer to Disassembly and Assembly, "Engine Oil Pressure Sensor" for the correct procedure.
Cut cable straps (5) from harness assembly for crankshaft position sensor (6) (not shown). Disconnect the harness assembly from crankshaft position sensor (6) (not shown). Refer to Disassembly and Assembly, "Crankshaft Position Sensor" for the correct procedure.
Cut cable st