20805523 Sealing kit Volvo.Penta
TAD550GE; TAD551GE; TAD750GE, TAD750VE; TAD760VE
Sealing
Price: query
Rating:
You can buy parts:
As an associate, we earn commssions on qualifying purchases through the links below
$11.99
19-09-2023
-: -
UMIRIKO Car Trash Can Pink Hanging Car Garbage Bin Foldable, Leak-Proof, Waterproof S 20805523
SIZE: S: 8.66 x 8.66 x 5.9 INCH and M: 11 x 11 x 5.9 INCH || LEAK-PROOF AND WATERPROOF: This car trash can is made of Oxford cloth, which is waterproof. The interior is supported by a PE board, which makes the trash can more three-dimensional and stable, and can be placed on the floor of the car. || FOLDABLE AND HANGING: The trash can has an adjustable shoulder strap, which can be hung on the back of the seat. With a fixed snap, it can fix the garbage bag and prevent the garbage bag from being transferred into the trash can. It can be folded and stored when not in use. || MULTI-FUNCTIONAL: The waterproof and leak-proof car dumpster can store a variety of items, and can also store garbage bags. Keep the inside of your car neat and clean. || EASY WIPE AND REUSABLE: The inner layer is hot-pressed with PEVA material, Wipe or rinse to keep the trash can clean.
SIZE: S: 8.66 x 8.66 x 5.9 INCH and M: 11 x 11 x 5.9 INCH || LEAK-PROOF AND WATERPROOF: This car trash can is made of Oxford cloth, which is waterproof. The interior is supported by a PE board, which makes the trash can more three-dimensional and stable, and can be placed on the floor of the car. || FOLDABLE AND HANGING: The trash can has an adjustable shoulder strap, which can be hung on the back of the seat. With a fixed snap, it can fix the garbage bag and prevent the garbage bag from being transferred into the trash can. It can be folded and stored when not in use. || MULTI-FUNCTIONAL: The waterproof and leak-proof car dumpster can store a variety of items, and can also store garbage bags. Keep the inside of your car neat and clean. || EASY WIPE AND REUSABLE: The inner layer is hot-pressed with PEVA material, Wipe or rinse to keep the trash can clean.
$12.99
29-06-2023
-: -
UMIRIKO Car Trash Can Pink Hanging Car Garbage Bin Foldable, Leak-Proof, Waterproof M 20805523
SIZE: S: 8.66 x 8.66 x 5.9 INCH and M: 11 x 11 x 5.9 INCH || LEAK-PROOF AND WATERPROOF: This car trash can is made of Oxford cloth, which is waterproof. The interior is supported by a PE board, which makes the trash can more three-dimensional and stable, and can be placed on the floor of the car. || FOLDABLE AND HANGING: The trash can has an adjustable shoulder strap, which can be hung on the back of the seat. With a fixed snap, it can fix the garbage bag and prevent the garbage bag from being transferred into the trash can. It can be folded and stored when not in use. || MULTI-FUNCTIONAL: The waterproof and leak-proof car dumpster can store a variety of items, and can also store garbage bags. Keep the inside of your car neat and clean. || EASY WIPE AND REUSABLE: The inner layer is hot-pressed with PEVA material, Wipe or rinse to keep the trash can clean.
SIZE: S: 8.66 x 8.66 x 5.9 INCH and M: 11 x 11 x 5.9 INCH || LEAK-PROOF AND WATERPROOF: This car trash can is made of Oxford cloth, which is waterproof. The interior is supported by a PE board, which makes the trash can more three-dimensional and stable, and can be placed on the floor of the car. || FOLDABLE AND HANGING: The trash can has an adjustable shoulder strap, which can be hung on the back of the seat. With a fixed snap, it can fix the garbage bag and prevent the garbage bag from being transferred into the trash can. It can be folded and stored when not in use. || MULTI-FUNCTIONAL: The waterproof and leak-proof car dumpster can store a variety of items, and can also store garbage bags. Keep the inside of your car neat and clean. || EASY WIPE AND REUSABLE: The inner layer is hot-pressed with PEVA material, Wipe or rinse to keep the trash can clean.
$10.99
27-03-2023
-: -
UMIRIKO Tire Covers Waterproof Pink Spare Wheel Tire Covers 28'' for RV Trailer SUV Truck Camper Travel Trailer Accessories 20805523
[Four Sizes]: S: Diameter 24.41in Suitable for diameters 23-25.5 inches. M: Diameter 26.38in is suitable for 25.5-27.5 inches. L: Diameter 28.35in is suitable for 27.5-29.5 inches. XL: Diameter 30.71in is suitable for 29.5-31.4 inches. The width of each size wheel well is 9.8 inches. || [High-quality Material]: Made of silver-coated Oxford fabric, which has sun protection function, reduces the damage caused by the sun and protects the tires. || [Waterproof and Dustproof]: The fabric is waterproof, reducing the damage caused by dogs peeing on the tires, rain or other substances, and avoiding the shortening of the service life of the tires. A spare tire placed in the yard, using this tire cover can prevent leaves, mud, etc. from getting stuck in the wheel. || [Easy to install]: With elastic band and hook design, better wrapping, easy to install, and increase the stability of use. || [WIDE APPLICATIONS]: Perfectly compatible with tires for trailers, RVs, SUVs, trucks and many other models.
[Four Sizes]: S: Diameter 24.41in Suitable for diameters 23-25.5 inches. M: Diameter 26.38in is suitable for 25.5-27.5 inches. L: Diameter 28.35in is suitable for 27.5-29.5 inches. XL: Diameter 30.71in is suitable for 29.5-31.4 inches. The width of each size wheel well is 9.8 inches. || [High-quality Material]: Made of silver-coated Oxford fabric, which has sun protection function, reduces the damage caused by the sun and protects the tires. || [Waterproof and Dustproof]: The fabric is waterproof, reducing the damage caused by dogs peeing on the tires, rain or other substances, and avoiding the shortening of the service life of the tires. A spare tire placed in the yard, using this tire cover can prevent leaves, mud, etc. from getting stuck in the wheel. || [Easy to install]: With elastic band and hook design, better wrapping, easy to install, and increase the stability of use. || [WIDE APPLICATIONS]: Perfectly compatible with tires for trailers, RVs, SUVs, trucks and many other models.
Number on catalog scheme: 24
Compatible models:
TAD550GE; TAD551GE; TAD750GE
TAD750VE; TAD760VE
Volvo.Penta
Volvo Penta entire parts catalog list:
- Cylinder Head » 20805523
Information:
1. Remove seven bolts (1), two bolts (2), housing (3) and the gasket. 2. Remove governor spring (4), the two wave washers, one flat washer and seat from the guide in the housing. 3. Remove the bolts, cover assembly (5) and the gasket. 4. Use tooling (A) to remove seal (6) from cover (5). 5. Remove low idle adjustment screw (8) and spring (7) from the housing. 6. Remove shaft assembly (10), lever (9) and lever (11) from the housing. 7. Remove two snap rings from pins (13), and remove pins (13). Remove plates (12) and stop (14) from the shaft assembly. 8. Remove pin (16), pin (15) and spring (17) from the shaft assembly. 9. Remove shaft (18) and lever (19) from the housing.
Remove check valve (20) only if a replacement is necessary, because the check valve will be damaged during the removal.
10. Remove check valve (20) if a replacement is necessary. 11. Remove contact (21) and body (22) for the governor dashpot adjustment screw from the housing. Remove bolts (23), cover (24) and the gasket from the housing. 12. Remove seal (25) and adjustment screw (26) for high idle. 13. Remove two bolts (27), housing (28) and the gasket from the fuel injection pump housing. 14. Remove bolts (29) and torque control group (30).15. Disassemble the torque control group and inspect the spacer, spring and insulator for damage or wear. 16. Remove bolts (32) and block (31) for the full load stop from the housing. 17. Remove the bolt that holds collar (33) to bolt (35). Remove collar (33) and spring (34) from bolt (35). Remove bolt (35) from the block.18. Remove the power adjustment screw from collar (33), if a replacement is necessary. 19. Remove bolts (37) and governor servo (36) from the fuel injection pump. The groove in the bottom of valve (38) must be in alignment with the servo body to permit removal from the fuel rack.20. Remove lockring (42), seat (41), spring (broken link spring) (40) and sleeve (39) from valve (38). Remove the other lockring (42) from the groove in the center of valve (38). 21. Remove valve (38), sleeve (43) and piston (45) from the governor servo. Remove the O-ring seal from sleeve (43).22. Remove pin (44) and lever (46) from the governor servo. 23. Use tool (C) to hold spring (48) in compression so ring (47) can be removed. Spring (48) is used to put a preload on the thrust bearing for the camshaft in the fuel injection pump housing.24. Remove ring (47), and remove tool (C). 25. Remove bearing (49), sleeves (50) and spring (48) from the governor shaft. 26. Remove ring (51) and dashpot assembly (52) from the governor shaft. 27. Use tool (B) to remove snap ring (58) from seat (55). Remove ring (57) and spool (56) from seat (55).28. Remove seat (55) from spring (54), and remove spring (54) from seat (53). 29. Remove spring (overfueling spring) (59) and riser (60) from the governor shaft. 30. Remove ring (61), races (62) and bearing (63) from the riser. Make a replacement of shield (64) any time it is removed.31. Use a screwdriver to remove shield (64) as shown. 32. Remove bolts (65) and carrier (66) for the governor flyweights. 33. Remove dowels (67) and flyweights (69) from the carrier.34. Remove shaft (68) from the carrier. Remove the dowel from shaft (68). 35. Remove races (70) and bearing (71) from the camshaft in the fuel injection pump housing.Assemble Governor
If the governor was removed only to permit repair of the fuel injection pump housing, do only Steps 1, 4, 5, 7, 9, 10, 11, 16, 22 and 38. Put clean oil on all parts before assembly. Be sure all oil passage are clear. 1. Install one race (70), bearing (71) and the other race (70) on the camshaft in the fuel injection pump housing. 2. Put flyweights (69) in position on carrier (66), and install the dowels to hold the flyweights in place. The flyweights must move freely on the dowels and have 0.010 to 0.23 mm (0.0004 to 0.009 in.) end play. 3. Install dowel (72) in governor shaft (68) and install the governor shaft in the carrier as shown. 4. Put carrier (66) in position on the camshaft, and install bolts (65) that hold the carrier in place.
Replace shield (64) with a new part any time it is removed.
5. Install shield (64) on the carrier, and use tool (D) to push the shield against its seat. Use a hammer and punch to move the metal (stake) two places on the side of the shield 180° 5° apart next to the holes in the shield. 6. Install one race (62), bearing (63), the other race (62) and use tool (B) to install ring (61) on riser (60) as shown. 7. Install riser (60) and the spring (overfueling spring) on the governor shaft as shown. 8. Assemble the dashpot as follows:a. Install spring (54) on seat (53), and install seat (55) in spring (54).b. Put spool (56) and ring (57) in position on seat (55), and use tool (B) to install snap ring (58) to hold them in place. 9. Install dashpot assembly (52) on the governor shaft as shown. 10. Install ring (51) in the lower groove in the governor shaft. Install one sleeve (50), spring (48), the other sleeve (50) and bearing (49) on the governor shaft as shown. Spring (48) is used to put a preload on the thrust bearing on the camshaft in the fuel injection pump housing. 11. Use tool (C) to hold spring (48) in compression, and install ring (47) in the groove in the governor shaft. Remove tool (C). 26. Install an O-ring seal on body (22) for the dashpot adjustment, and install the body in the housing.27. Install gasket
Remove check valve (20) only if a replacement is necessary, because the check valve will be damaged during the removal.
10. Remove check valve (20) if a replacement is necessary. 11. Remove contact (21) and body (22) for the governor dashpot adjustment screw from the housing. Remove bolts (23), cover (24) and the gasket from the housing. 12. Remove seal (25) and adjustment screw (26) for high idle. 13. Remove two bolts (27), housing (28) and the gasket from the fuel injection pump housing. 14. Remove bolts (29) and torque control group (30).15. Disassemble the torque control group and inspect the spacer, spring and insulator for damage or wear. 16. Remove bolts (32) and block (31) for the full load stop from the housing. 17. Remove the bolt that holds collar (33) to bolt (35). Remove collar (33) and spring (34) from bolt (35). Remove bolt (35) from the block.18. Remove the power adjustment screw from collar (33), if a replacement is necessary. 19. Remove bolts (37) and governor servo (36) from the fuel injection pump. The groove in the bottom of valve (38) must be in alignment with the servo body to permit removal from the fuel rack.20. Remove lockring (42), seat (41), spring (broken link spring) (40) and sleeve (39) from valve (38). Remove the other lockring (42) from the groove in the center of valve (38). 21. Remove valve (38), sleeve (43) and piston (45) from the governor servo. Remove the O-ring seal from sleeve (43).22. Remove pin (44) and lever (46) from the governor servo. 23. Use tool (C) to hold spring (48) in compression so ring (47) can be removed. Spring (48) is used to put a preload on the thrust bearing for the camshaft in the fuel injection pump housing.24. Remove ring (47), and remove tool (C). 25. Remove bearing (49), sleeves (50) and spring (48) from the governor shaft. 26. Remove ring (51) and dashpot assembly (52) from the governor shaft. 27. Use tool (B) to remove snap ring (58) from seat (55). Remove ring (57) and spool (56) from seat (55).28. Remove seat (55) from spring (54), and remove spring (54) from seat (53). 29. Remove spring (overfueling spring) (59) and riser (60) from the governor shaft. 30. Remove ring (61), races (62) and bearing (63) from the riser. Make a replacement of shield (64) any time it is removed.31. Use a screwdriver to remove shield (64) as shown. 32. Remove bolts (65) and carrier (66) for the governor flyweights. 33. Remove dowels (67) and flyweights (69) from the carrier.34. Remove shaft (68) from the carrier. Remove the dowel from shaft (68). 35. Remove races (70) and bearing (71) from the camshaft in the fuel injection pump housing.Assemble Governor
If the governor was removed only to permit repair of the fuel injection pump housing, do only Steps 1, 4, 5, 7, 9, 10, 11, 16, 22 and 38. Put clean oil on all parts before assembly. Be sure all oil passage are clear. 1. Install one race (70), bearing (71) and the other race (70) on the camshaft in the fuel injection pump housing. 2. Put flyweights (69) in position on carrier (66), and install the dowels to hold the flyweights in place. The flyweights must move freely on the dowels and have 0.010 to 0.23 mm (0.0004 to 0.009 in.) end play. 3. Install dowel (72) in governor shaft (68) and install the governor shaft in the carrier as shown. 4. Put carrier (66) in position on the camshaft, and install bolts (65) that hold the carrier in place.
Replace shield (64) with a new part any time it is removed.
5. Install shield (64) on the carrier, and use tool (D) to push the shield against its seat. Use a hammer and punch to move the metal (stake) two places on the side of the shield 180° 5° apart next to the holes in the shield. 6. Install one race (62), bearing (63), the other race (62) and use tool (B) to install ring (61) on riser (60) as shown. 7. Install riser (60) and the spring (overfueling spring) on the governor shaft as shown. 8. Assemble the dashpot as follows:a. Install spring (54) on seat (53), and install seat (55) in spring (54).b. Put spool (56) and ring (57) in position on seat (55), and use tool (B) to install snap ring (58) to hold them in place. 9. Install dashpot assembly (52) on the governor shaft as shown. 10. Install ring (51) in the lower groove in the governor shaft. Install one sleeve (50), spring (48), the other sleeve (50) and bearing (49) on the governor shaft as shown. Spring (48) is used to put a preload on the thrust bearing on the camshaft in the fuel injection pump housing. 11. Use tool (C) to hold spring (48) in compression, and install ring (47) in the groove in the governor shaft. Remove tool (C). 26. Install an O-ring seal on body (22) for the dashpot adjustment, and install the body in the housing.27. Install gasket
Parts sealing Volvo Penta:
20405769
20405769 Sealing ring
D5A-T; D5A-TA; D5A-B TA, D5A-T; D5A-TA; D5A-B TA, TAD520GE; TAD720GE; TAD721GE, TAD520VE; TAD720VE; TAD721VE, TAD550GE; TAD551GE; TAD750GE, TD420VE; TAD420VE; TAD620VE, TD520GE; TAD530GE; TAD531GE, TD520VE; TD720VE
21108673
21108673 Sealing ring
D5A-T; D5A-TA; D5A-B TA, D5A-T; D5A-TA; D5A-B TA, TAD520GE; TAD720GE; TAD721GE, TAD520VE; TAD720VE; TAD721VE, TAD550GE; TAD551GE; TAD750GE, TAD650VE; TAD660VE, TAD734GE, TAD750VE; TAD760VE, TD420VE; TAD420VE; TAD620VE, TD520GE; TAD530GE; TAD531GE, TD
20405569
20405569 Sealing ring
D5A-T; D5A-TA; D5A-B TA, D5A-T; D5A-TA; D5A-B TA, TAD520GE; TAD720GE; TAD721GE, TAD520VE; TAD720VE; TAD721VE, TAD550GE; TAD551GE; TAD750GE, TAD750VE; TAD760VE, TD520GE; TAD530GE; TAD531GE, TD520VE; TD720VE
20459961
20459961 Sealing ring
D5A-T; D5A-TA; D5A-B TA, D5A-T; D5A-TA; D5A-B TA, TAD520GE; TAD720GE; TAD721GE, TAD520VE; TAD720VE; TAD721VE, TAD550GE; TAD551GE; TAD750GE, TAD650VE; TAD660VE, TAD750VE; TAD760VE, TD420VE; TAD420VE; TAD620VE, TD520GE; TAD530GE; TAD531GE
20460026
20460026 Sealing ring
TAD520GE; TAD720GE; TAD721GE, TAD650VE; TAD660VE, TAD734GE, TAD750VE; TAD760VE, TD420VE; TAD420VE; TAD620VE, TD520GE; TAD530GE; TAD531GE
21034305
20921906
20921906 Sealing ring
TAD550GE; TAD551GE; TAD750GE, TAD560VE; TAD561VE; TAD761VE, TAD650VE; TAD660VE, TAD750VE; TAD760VE
21075389