21244928 Volvo.Penta Sealing ring

Cross-Reference Information for Event Codes
Event codes are generated when abnormal operating conditions exist. Table 1 is a list of the event codes for the engine. The event codes are cross-referenced with the appropriate procedure that can be used to troubleshoot the code.
Table 1
Cross-Reference from Event Code to the Appropriate Test Procedure
Event Code Procedure
E096(2) High Fuel Pressure Troubleshooting, "Fuel Pressure Is High"
E198(2) Low Fuel Pressure Troubleshooting, "Fuel Pressure Is Low"
E265(1) User Defined Shutdown Troubleshooting, "Engine Shutdown Occurrence"
E321(1) High Right Exhaust Temperature Information is Not Available.
E321(2) High Right Exhaust Temperature
E321(3) High Right Exhaust Temperature
E322(1) High Left Exhaust Temperature
E322(2) High Left Exhaust Temperature
E322(3) High Left Exhaust Temperature
E360(1) Low Engine Oil Pressure Troubleshooting, "Oil Pressure Is Low"
E360(2) Low Engine Oil Pressure
E360(3) Low Engine Oil Pressure
E361(1) High Engine Coolant Temperature Troubleshooting, "Coolant Temperature Is High"
E361(2) High Engine Coolant Temperature
E361(3) High Engine Coolant Temperature
E362(1) Engine Overspeed Troubleshooting, "Engine Overspeeds"
E362(3) Engine Overspeed
E363(1) High Fuel Supply Temperature Troubleshooting, "Fuel Temperature Is High"
E363(2) High Fuel Supply Temperature
E363(3) High Fuel Supply Temperature
E390(1) Fuel Filter Restriction
E390(2) Fuel Filter Restriction
E539(1) High Intake Manifold Air Temperature Troubleshooting, "Intake Manifold Air Temperature Is High"
E539(2) High Intake Manifold Air Temperature
E539(3) High Intake Manifold Air Temperature
E583(1) High Air Inlet #1 Differential Pressure Troubleshooting, "Inlet Air Is Restricted"
E583(2) High Air Inlet #1 Differential Pressure
E584(1) High Air Inlet #2 Differential Pressure
E584(2) High Air Inlet #2 Differential Pressure
E678(1) Ground Level Shutdown
E775(1) High Left Exhaust #2 Temperature Information is Not Available.
E775(2) High Left Exhaust #2 Temperature
E775(3) High Left Exhaust #2 Temperature
E776(1) High Right Exhaust #2 Temperature
E776(2) High Right Exhaust #2 Temperature
E776(3) High Right Exhaust #2 Temperature
E1045(2) Low Intake Manifold Pressure Troubleshooting, "Intake Manifold Air Pressure Is Low"
E1130(2) High Intake Manifold #2 Air Temperature Troubleshooting, "Intake Manifold Air Temperature Is High"
E1130(3) High Intake Manifold #2 Air Temperature
E1171(1) Engine Idle Shutdown Occurred
E1172(3) Engine Idle Shutdown Pending Troubleshooting, "Engine Shutdown While Idling"
E1217 Delayed Engine Shutdown Override Parts of the Event Code
Event Code - The "E" identifies the code as an event code. The "XXX(X)" represents a numeric identifier for the event code. The fourth "(X)" assigns one of three levels to the active event code according to the severity of the abnormal system condition. This is followed by a description of the code. Refer to the following example:
E360(1) Low Oil Pressure
E360(2) Low Oil Pressure
E360(3) Low Oil PressureThe definition for the levels of severity for an event are defined below:
Table 2
Indicators (1), (2), and (3)
Warning Category Indicator Severity
(1) Least Severe
(2) Moderate Severity
(3) Most Severe Active Event Codes
An active event code represents a problem with engine operation. Correct the problem as soon as possible.Active event codes are listed in ascending numerical order. The code with the lowest number is listed first.Illustration 1 is an example of the operating range of a sensor.
Illustration 1 g01365757
Example of the typical operating range of a sensor
(1) This area represents the normal operating range of the engine parameter.
(2) In these areas, the engine is operating in an unsafe operating range of the monitored parameter. An event code will be generated for the monitored parameter. The sensor circuit does not have an electronic problem.
(3) In these areas, the signal from the sensor is outside of the operating range of the sensor. The sensor circuit has an electronic problem. A diagnostic code will be generated for the sensor circuit. Refer to Troubleshooting, "Diagnostic Trouble Codes" for additional information on diagnostic codes. Logged Event Codes
When the ECM generates an event code, the ECM may log the event code in permanent memory. The ECM has an internal diagnostic clock. The ECM will record the following information when an event code is generated:
The hour of the first occurrence of the code
The hour of the last occurrence of the code
The number of occurrences of the codeLogged events are listed in chronological order. The most recent event code is listed first.This information can be helpful for troubleshooting intermittent problems. Logged codes can also be used to revie