244807 Shim Volvo.Penta
2001; 2001B; 2001AG, AQD70D; TAMD70D; TAMD70E, DH10A; DH10A 285; DH10A 360, MD120A; MD120AK; TMD120A, MD70C; TMD70C; TAMD70C, TAD1230G; TD1210G; TWD1210G, TAD1230P; TD121GP-87; TWD1210P, TAMD103A, TAMD122A; TMD122A; TAMD122P-A, TAMD60C, TAMD61A; TAMD
Shim
Price: query
Rating:
You can buy parts:
As an associate, we earn commssions on qualifying purchases through the links below
Tail Bag Compatible with Cruiser Dry Bag XF40 CB12126
Bagtecs Important: Please check the pictures and measurements to see if the bag can be attached to your motorcycle. This is a universal item, the models listed are only examples. Scope of delivery: Tail bag, 4 loop straps with clip fastening, shoulder strap || Dimensions: width 58cm, height 32cm, depth 30cm, volume 40l. Motorcycle rear tail bag for the passenger seat or luggage rack with a capacity of 40 liters. Made of durable PVC tarpaulin, absolutely waterproof || The roll closure reliably prevents the ingress of water even during long journeys in heavy rainfall. Opening of the motorcycle bag over the entire width allows comfortable loading of the bag from above. Universally suitable for virtually all motorcycles || The dry pack is fixed by means of 4 tension straps with loops, which are attached to the bag with clip fasteners. Secure and easy fastening of the rear pocket without loose elastic bands or straps. Shoulder strap for easy transport of the bag || Reflective elements for better visibility and more security. Clip adapter allows attachment of additional Bagtecs bags to increase volume
Bagtecs Important: Please check the pictures and measurements to see if the bag can be attached to your motorcycle. This is a universal item, the models listed are only examples. Scope of delivery: Tail bag, 4 loop straps with clip fastening, shoulder strap || Dimensions: width 58cm, height 32cm, depth 30cm, volume 40l. Motorcycle rear tail bag for the passenger seat or luggage rack with a capacity of 40 liters. Made of durable PVC tarpaulin, absolutely waterproof || The roll closure reliably prevents the ingress of water even during long journeys in heavy rainfall. Opening of the motorcycle bag over the entire width allows comfortable loading of the bag from above. Universally suitable for virtually all motorcycles || The dry pack is fixed by means of 4 tension straps with loops, which are attached to the bag with clip fasteners. Secure and easy fastening of the rear pocket without loose elastic bands or straps. Shoulder strap for easy transport of the bag || Reflective elements for better visibility and more security. Clip adapter allows attachment of additional Bagtecs bags to increase volume
$11.99
18-09-2023
-: -
Icon Health & Fitness, Inc. Power Jack Bracket 244807 Works W Freemotion c5.7 Row TV U300 Upright Bike
Part #: 244807 || How to Buy Exercise Equipment Replacement Parts: Locate your Model Name & Model (Icon)/ Serial (All Other Manufacturers) Number. Then find the information in product description. For Serial Numbers the first 2-5 characters will suffice || Please check compatibility options in the description. || If you are uncomfortable with diagnosing and treating your machine with the RIGHT replacement parts we can recommend a fitness technician in your area via zip code
Part #: 244807 || How to Buy Exercise Equipment Replacement Parts: Locate your Model Name & Model (Icon)/ Serial (All Other Manufacturers) Number. Then find the information in product description. For Serial Numbers the first 2-5 characters will suffice || Please check compatibility options in the description. || If you are uncomfortable with diagnosing and treating your machine with the RIGHT replacement parts we can recommend a fitness technician in your area via zip code
Compatible models:
2001; 2001B; 2001AG
AQD70D; TAMD70D; TAMD70E
DH10A; DH10A 285; DH10A 360
MD120A; MD120AK; TMD120A
MD70C; TMD70C; TAMD70C
TAD1230G; TD1210G; TWD1210G
TAD1230P; TD121GP-87; TWD1210P
TAMD103A
TAMD122A; TMD122A; TAMD122P-A
TAMD60C
TAMD61A; TAMD62A
TAMD63L-A; TAMD63P-A
TAMD71A; TAMD72A
TAMD71B; TAMD73P-A; TAMD73WJ-A
TAMD72P-A; TAMD72WJ-A
TAMD74A; TAMD74A-A; TAMD74A-B
TD100CHC; TD100CRC; TD121CHC
TD121G-87; TWD1210V; TWD1211V
TD30A; TD31ACE; TD40A
TD610G; TWD610G; TD710G
TD610M; TD630ME; TWD630ME
TD610V; TWD610V; TD630VE
TD61A; TD61AW; TD61ACE
TD71A; TID71A; TWD710V
TMD100C
TMD102A; TAMD102A; TAMD102D
TMD121C; TAMD121C; TAMD121D
TWD1230ME
TWD610P; TWD610PB; TWD710P
Volvo.Penta
Volvo Penta entire parts catalog list:
- Fuel Injector » 244807
DH10A; DH10A 285; DH10A 360; DH10A Rail; THD102KD; THD102KB
MD120A; MD120AK; TMD120A; TMD120AK; TAMD120A; TAMD120AK; TMD120B; TAMD120B; TAMD120B-CC
- Fuel Injector, Components: 468748
- Fuel Injector, Components: 848228
- Fuel Injector, Components: 865853
TAD1230G; TD1210G; TWD1210G; TWD1211G; TAD1231GE; TAD1232GE
- Fuel Injector, Components
- Fuel Injector, Components: 468748
- Fuel Injector, Components: 848228
- Fuel Injector, Components: 865853
- Fuel Injector, Components: 468748
- Fuel Injector, Components: 848228
- Fuel Injector, Components: 865853
- Fuel Injector, Components: 468748
- Fuel Injector, Components: 848228
- Fuel Injector, Components: 865853
TAMD122A; TMD122A; TAMD122P-A; TAMD122P-B; TAMD122P-C; TMD122A/C; TAMD122AF
- Fuel Injector, Components
- Fuel Injector, Components: A
- Fuel Injector, Components: B
- Fuel Injector, Components: C
TAMD61A; TAMD62A
TAMD63L-A; TAMD63P-A
- Fuel Injector, Components: 865561
- Fuel Injector, Components: 864827
- Fuel Injector, Components: 3827030
TAMD71B; TAMD73P-A; TAMD73WJ-A
TAMD72P-A; TAMD72WJ-A
TAMD74A; TAMD74A-A; TAMD74A-B; TAMD74C-A; TAMD74C-B; TAMD74L-A; TAMD74L-B; TAMD74P-A; TAMD74P-B; TAMD75P-A
TD100CHC; TD100CRC; TD121CHC; TD121CRC; TAD121CHC
TD121G-87; TWD1210V; TWD1211V; TAD1230V; TWD1230VE; TWD1231VE
- Fuel Injector, Components
- Fuel Injector, Components: 468748
- Fuel Injector, Components: 848228
- Fuel Injector, Components: 865853
TD610G; TWD610G; TD710G; TWD710G; TAD730G; TWD740GE; TAD740GE; TAD741GE
- Fuel Injector, Components: 848730
- Fuel Injector, Components: 848799
- Fuel Injector, Components: 865561
- Fuel Injector, Components: 3827030
- Fuel Injector, Components
- Fuel Injector, Components: 848729
- Fuel Injector, Components: 420805
- Fuel Injector, Components: 866882
- Fuel Injector, Components: 848729
- Fuel Injector, Components: 420805
- Fuel Injector, Components: 866882
- Fuel Injector, Components: 848730
- Fuel Injector, Components: 848799
TD71A; TID71A; TWD710V; TD730VE; TWD731VE; TAD730V; TWD740VE
- Fuel Injector, Components: 865562
- Fuel Injector, Components: 3825737
- Fuel Injector, Components: 3826446
- Fuel Injector, Components: 848730
- Fuel Injector, Components: 848799
TMD102A; TAMD102A; TAMD102D
TMD121C; TAMD121C; TAMD121D; TAMD122C; TAMD122D
TWD1230ME
- Fuel Injector, Components
- Fuel Injector, Components
- Fuel Injector, Components: A
- Fuel Injector, Components: B
Information:
Removing The Engine
INADVERTENT STARTING OF THE ENGINE CAN CAUSE PERSONAL INJURY. SHUT THE ENGINE DOWN AND REMOVE THE KEY FROM THE IGNITION SWITCH.
1. Set the battery switch at "Off" and disconnect the battery ground (-) cable from the battery. 2. Open the drain valve and drain the fuel tank. 3. Remove the air stack extension and muffler. Cover the openings in the air cleaner and the engine. 4. Remove the upper radiator grill and upper pump cowling.5. Unbolt and remove as a unit the radiator cowling, engine cowling and front and rear pump cowling. 6. Remove the ducting from between the engine and the air cleaner, then cover the openings in the engine and air cleaner.7. Unbolt the mounting bracket from the engine, then remove the air cleaner and mounting bracket.8. On machines 504109 through 504113, remove the radiator support bracket from between the engine and the radiator.
MACHINES 504114 & SUBSEQUENT
MACHINES 504122 & SUBSEQUENT9. On machines 504114 and subsequent, remove the radiator mount support.10. On machines 504122 and subsequent, remove the fan guard.11. Drain the radiator, then remove the upper and lower hoses from between the engine and radiator. 12. Relieve the accessory pump drive belt tension, then remove the belt.13. Repeat step 12 for the water pump drive belt. 14. Close the shutoff valves in the pump supply lines. 15. If the machine is not equipped with an auxiliary cutter, skip this step and step 16. Otherwise, thoroughly clean around the auxiliary cutter drive pump and hose connections, then disconnect the hoses from the pump. Cap or plug all openings immediately.16. Attach a lifting device to the auxiliary cutter drive pump, remove the mounting bolts, move the pump straight back until the pump shaft is clear of the gearbox, then move the pump away.17. Thoroughly clean around the wheel drive pump and hose connections, then disconnect the hoses from the pump. Cap or plug all openings immediately. 18. Disconnect the wheel drive pump control cable mounting bracket and cable from the pump and lay them aside where they will not be damaged. DO NOT ALTER THE CONTROL CABLE ADJUSTMENT.19. Attach a lifting device to the wheel drive pump, remove the mounting bolts, move the pump straight back until the pump shaft is clear of the gearbox, then move the pump away.20. Remove the cutter drive shaft (see Cutter 3.0-11). 21. Disconnect the throttle cable and lay it aside where it will not interfere with engine removal.22. Disconnect the fuel supply and return hoses from the engine.23. Mark for identification during reassembly, then disconnect all wiring harness wires from the terminals at the following engine components: a. Starter.b. Fuel solenoid.c. Oil pressure sender.d. Oil pressure switch.e. Water temperature sender.f. Alternator.g. Hour meter.24. Check the engine over to be sure all wires, cables and hydraulic lines which would interfere with engine removal have been disconnected. 25. Attach a lifting device to the engine and take enough of a strain in the lifting lines to support the engine.26. Remove the bolts which hold the rear mount bracket to the cutter slide assembly and the front of the engine to either the radiator and oil cooler bracket or the water pump mounting bracket.27. Lift the engine straight up and away.Building The Engine Up
The simplest way to build up a new engine is to position the new engine beside the old one and properly support both so they can safely be worked on. Then remove one component at a time from the old engine and install it on the new engine until all required components have been transferred to the new engine. Components that may have to be transferred include: 1. The pump drive gearbox. See page 4.0-2 for removal and installation procedures.2. The throttle bracket.3. The engine oil pressure switch and sender.4. The water temperature sender.5. The hour meter and bracket.Installing The Engine
1. Check that the mounting area on the machine is clear of all hoses, wires, control cables, etc.
MACHINES 504114 & SUBSEQUENT2. Attach a lifting device to the engine.3. Move the engine into position on the cutter slide assembly and install the mounting bolts.4. Install the cutter drive shaft (see Cutter 3.0-16).5. Attach a lifting device to the wheel drive pump, move the pump into position on the pump drive gearbox, then install the mounting bolts.6. If the machine is equipped with an auxiliary cutter, repeat step 5 for the auxiliary cutter drive pump.7. Thoroughly clean around the pump ports and hose connections, then connect the hoses to the pumps.8. Install the upper and lower radiator hoses.9. On machines 504122 and subsequent, install the fan guard.10. On machines 504114 and subsequent, install the radiator mount support. On machines 504109 through 504113, install the radiator support bracket (see page 2.1-2) 11. Connect the wiring harness wires to the terminals at the following components: a. Starter.b. Fuel solenoid.c. Oil pressure sender.d. Oil pressure switche. Water temperature sender.f. Alternator.g. Hour meter. 12. Connect the throttle cable.13. Connect the fuel supply and return lines to the engine.
ENGINE AIR INTAKE AND EXHAUST SYSTEM (504109 THROUGH 504113)
ENGINE AIR INTAKE AND EXHAUST SYSTEM (504113 AND SUBSEQUENT)14. Install the air cleaner and mounting bracket on the engine, then install the ducting between the engine and the air cleaner.15. Install the water pump and accessory pump drive belts and adjust the belt tension (see Miscellaneous 1.0-11 and Hydraulics - Accessory 3.0-2). 16. Open the shutoff valves in the pump supply lines, loosen the supply hose connection at each pump until air-free hydraulic oil flows from the connection, then tighten the connection.
THE SUPPLY HOSE TO EACH PUMP MUST BE FILLED WITH HYDRAULIC OIL BEFORE STARTING THE ENGINE OR THE PUMP WILL BE DAMAGED.
17. Fill the wheel drive pump case through the uppermost case drain port with filtered hydraulic oil. 18. Connect the control cable mounting bracket and cable to the wheel drive pump.19. Check the oil level in the hydraulic oil tank. Transfer oil from the reple
INADVERTENT STARTING OF THE ENGINE CAN CAUSE PERSONAL INJURY. SHUT THE ENGINE DOWN AND REMOVE THE KEY FROM THE IGNITION SWITCH.
1. Set the battery switch at "Off" and disconnect the battery ground (-) cable from the battery. 2. Open the drain valve and drain the fuel tank. 3. Remove the air stack extension and muffler. Cover the openings in the air cleaner and the engine. 4. Remove the upper radiator grill and upper pump cowling.5. Unbolt and remove as a unit the radiator cowling, engine cowling and front and rear pump cowling. 6. Remove the ducting from between the engine and the air cleaner, then cover the openings in the engine and air cleaner.7. Unbolt the mounting bracket from the engine, then remove the air cleaner and mounting bracket.8. On machines 504109 through 504113, remove the radiator support bracket from between the engine and the radiator.
MACHINES 504114 & SUBSEQUENT
MACHINES 504122 & SUBSEQUENT9. On machines 504114 and subsequent, remove the radiator mount support.10. On machines 504122 and subsequent, remove the fan guard.11. Drain the radiator, then remove the upper and lower hoses from between the engine and radiator. 12. Relieve the accessory pump drive belt tension, then remove the belt.13. Repeat step 12 for the water pump drive belt. 14. Close the shutoff valves in the pump supply lines. 15. If the machine is not equipped with an auxiliary cutter, skip this step and step 16. Otherwise, thoroughly clean around the auxiliary cutter drive pump and hose connections, then disconnect the hoses from the pump. Cap or plug all openings immediately.16. Attach a lifting device to the auxiliary cutter drive pump, remove the mounting bolts, move the pump straight back until the pump shaft is clear of the gearbox, then move the pump away.17. Thoroughly clean around the wheel drive pump and hose connections, then disconnect the hoses from the pump. Cap or plug all openings immediately. 18. Disconnect the wheel drive pump control cable mounting bracket and cable from the pump and lay them aside where they will not be damaged. DO NOT ALTER THE CONTROL CABLE ADJUSTMENT.19. Attach a lifting device to the wheel drive pump, remove the mounting bolts, move the pump straight back until the pump shaft is clear of the gearbox, then move the pump away.20. Remove the cutter drive shaft (see Cutter 3.0-11). 21. Disconnect the throttle cable and lay it aside where it will not interfere with engine removal.22. Disconnect the fuel supply and return hoses from the engine.23. Mark for identification during reassembly, then disconnect all wiring harness wires from the terminals at the following engine components: a. Starter.b. Fuel solenoid.c. Oil pressure sender.d. Oil pressure switch.e. Water temperature sender.f. Alternator.g. Hour meter.24. Check the engine over to be sure all wires, cables and hydraulic lines which would interfere with engine removal have been disconnected. 25. Attach a lifting device to the engine and take enough of a strain in the lifting lines to support the engine.26. Remove the bolts which hold the rear mount bracket to the cutter slide assembly and the front of the engine to either the radiator and oil cooler bracket or the water pump mounting bracket.27. Lift the engine straight up and away.Building The Engine Up
The simplest way to build up a new engine is to position the new engine beside the old one and properly support both so they can safely be worked on. Then remove one component at a time from the old engine and install it on the new engine until all required components have been transferred to the new engine. Components that may have to be transferred include: 1. The pump drive gearbox. See page 4.0-2 for removal and installation procedures.2. The throttle bracket.3. The engine oil pressure switch and sender.4. The water temperature sender.5. The hour meter and bracket.Installing The Engine
1. Check that the mounting area on the machine is clear of all hoses, wires, control cables, etc.
MACHINES 504114 & SUBSEQUENT2. Attach a lifting device to the engine.3. Move the engine into position on the cutter slide assembly and install the mounting bolts.4. Install the cutter drive shaft (see Cutter 3.0-16).5. Attach a lifting device to the wheel drive pump, move the pump into position on the pump drive gearbox, then install the mounting bolts.6. If the machine is equipped with an auxiliary cutter, repeat step 5 for the auxiliary cutter drive pump.7. Thoroughly clean around the pump ports and hose connections, then connect the hoses to the pumps.8. Install the upper and lower radiator hoses.9. On machines 504122 and subsequent, install the fan guard.10. On machines 504114 and subsequent, install the radiator mount support. On machines 504109 through 504113, install the radiator support bracket (see page 2.1-2) 11. Connect the wiring harness wires to the terminals at the following components: a. Starter.b. Fuel solenoid.c. Oil pressure sender.d. Oil pressure switche. Water temperature sender.f. Alternator.g. Hour meter. 12. Connect the throttle cable.13. Connect the fuel supply and return lines to the engine.
ENGINE AIR INTAKE AND EXHAUST SYSTEM (504109 THROUGH 504113)
ENGINE AIR INTAKE AND EXHAUST SYSTEM (504113 AND SUBSEQUENT)14. Install the air cleaner and mounting bracket on the engine, then install the ducting between the engine and the air cleaner.15. Install the water pump and accessory pump drive belts and adjust the belt tension (see Miscellaneous 1.0-11 and Hydraulics - Accessory 3.0-2). 16. Open the shutoff valves in the pump supply lines, loosen the supply hose connection at each pump until air-free hydraulic oil flows from the connection, then tighten the connection.
THE SUPPLY HOSE TO EACH PUMP MUST BE FILLED WITH HYDRAULIC OIL BEFORE STARTING THE ENGINE OR THE PUMP WILL BE DAMAGED.
17. Fill the wheel drive pump case through the uppermost case drain port with filtered hydraulic oil. 18. Connect the control cable mounting bracket and cable to the wheel drive pump.19. Check the oil level in the hydraulic oil tank. Transfer oil from the reple
Parts shim Volvo Penta:
244789
244789 Shim
2001; 2001B; 2001AG, AD30A; AQAD30A; MD30A, AQD70D; TAMD70D; TAMD70E, DH10A; DH10A 285; DH10A 360, MD120A; MD120AK; TMD120A, MD70C; TMD70C; TAMD70C, TAD1230G; TD1210G; TWD1210G, TAD1230P; TD121GP-87; TWD1210P, TAMD103A, TAMD122A; TMD122A; TAMD122P-A,
240036
240036 Shim
AQD70D; TAMD70D; TAMD70E, D100A; D100AK; D100B, D100BHC; D100BRC; TD100AHC, D120A; D120AK; TD120A, D70B; D70B PP; D70B K, D70CHC; D70CRC; TD70CHC, MD100A; TMD100A; TMD100AK, MD120A; MD120AK; TMD120A, MD70B; MD70BK; TMD70B, MD70C; TMD70C; TAMD70C, TAD
244915
244915 Shim
TAD1230G; TD1210G; TWD1210G, TAD1230P; TD121GP-87; TWD1210P, TAMD122A; TMD122A; TAMD122P-A, TAMD162A; TAMD162B; TAMD162C, TAMD162C-C; TAMD163A-A; TAMD163P-A, TAMD165A; TAMD165C; TAMD165P, TAMD61A; TAMD62A, TAMD71A; TAMD72A, TD100CHC; TD100CRC; TD121C
11705726
11705726 Shim
2001; 2001B; 2001AG, AD31D; AD31D-A; AD31XD, AD31L-A; AD31P-A; AD41L-A, AD41D; D41D; TAMD41D, KAD32P; TAMD42WJ-A; KAD43P-A, KAD42B; KAMD42B; TAMD42B, KAD42P-A; KAMD42P-A; HS1A
941835
941835 Shim
2001; 2001B; 2001AG, AD30A; AQAD30A; MD30A, AQ115A; AQ115B; AQ130, AQ145A; BB145A, AQ225D; AQ225E; AQ225F, AQ260A; AQ260B; BB260A, MD11; MD11C; MD11D, MD2010-C; MD2010-D; MD2020-C, MD2010A; MD2020A; MD2030A, MD2010B; MD2020B; MD2030B, MD21B; AQD21B,
949776
949776 Shim
2001; 2001B; 2001AG, AD30A; AQAD30A; MD30A, MD11; MD11C; MD11D, MD2010-C; MD2010-D; MD2020-C, MD2010A; MD2020A; MD2030A, MD2010B; MD2020B; MD2030B, MD22A; MD22A-A; MD22L-A, MD22L; MD22P; MD22L-B, MD31A; TMD31A; TMD31B, MD5A; MD5B; MD5C, MD6; MD6A; MD
943866
943866 Shim
2001; 2001B; 2001AG, 230A; 230B; 250A, 251A, 430; 430A; 430B, 500; 500A; 501A, 571A, 740A; BB740A, AD30A; AQAD30A; MD30A, AD31D; AD31D-A; AD31XD, AQ115A; AQ115B; AQ130, AQ120B; AQ125A; AQ140A, AQ125B, AQ131A; AQ131B; AQ131C, AQ145A; BB145A, AQ145B, A
845726
845726 Shim
AD30A; AQAD30A; MD30A, AD31D; AD31D-A; AD31XD, AD41D; D41D; TAMD41D, KAD42A; KAMD42A; HS1A, KAD42B; KAMD42B; TAMD42B, MD31A; TMD31A; TMD31B, MD31A; TMD31B; TAMD31B, MD40A; TMD40A; TMD40B, TD30A; TD31ACE; TD40A, TMD41A; TMD41B; D41A, TMD41B; D41B; TAM