826861 Volvo.Penta Tube

Table 1
Diagnostic Codes Table    
J1939 Code and Description    Conditions which Generate this Code    System Response    
1352-3
Engine Cylinder #1 Knock Level : Voltage Above Normal     The Electronic Control Module (ECM) detects signal voltage that is not in the acceptable range.     The code is logged.
The alarm output is activated.    
1352-4
Engine Cylinder #1 Knock Level : Voltage Below Normal    
1352-19
Engine Cylinder #1 Knock Level : Data Error     The level of detonation has exceeded the trip point.     The code is logged.
The alarm output is activated.    
1353-3
Engine Cylinder #2 Knock Level : Voltage Above Normal     The Electronic Control Module (ECM) detects signal voltage that is not in the acceptable range.     The code is logged.
The alarm output is activated.    
1353-4
Engine Cylinder #2 Knock Level : Voltage Below Normal    
1353-19
Engine Cylinder #2 Knock Level : Data Error     The level of detonation has exceeded the trip point.     The code is logged.
The alarm output is activated.    
1354-3
Engine Cylinder #3 Knock Level : Voltage Above Normal     The Electronic Control Module (ECM) detects signal voltage that is not in the acceptable range.     The code is logged.
The alarm output is activated.    
1354-4
Engine Cylinder #3 Knock Level : Voltage Below Normal    
1354-19
Engine Cylinder #3 Knock Level : Data Error     The level of detonation has exceeded the trip point.     The code is logged.
The alarm output is activated.    
1355-3
Engine Cylinder #4 Knock Level : Voltage Above Normal     The Electronic Control Module (ECM) detects signal voltage that is not in the acceptable range.     The code is logged.
The alarm output is activated.    
1355-4
Engine Cylinder #4 Knock Level : Voltage Below Normal    
1355-19
Engine Cylinder #4 Knock Level : Data Error     The level of detonation has exceeded the trip point.     The code is logged.
The alarm output is activated.    
1356-3
Engne Cylinder #5 Knock Level : Voltage Above Normal     The Electronic Control Module (ECM) detects signal voltage that is not in the acceptable range.     The code is logged.
The alarm output is activated.    
1356-4
Engine Cylinder #5 Knock Level : Voltage Below Normal    
1356-19
Engine Cylinder #5 Knock Level : Data Error     The level of detonation has exceeded the trip point.     The code is logged.
The alarm output is activated.    
1357-3
Engine Cylinder #6 Knock Level : Voltage Above Normal     The Electronic Control Module (ECM) detects signal voltage that is not in the acceptable range.     The code is logged.
The alarm output is activated.    
1357-4
Engine Cylinder #6 Knock Level : Voltage Below Normal    
1357-19
Engine Cylinder #6 Knock Level : Data Error     The level of detonation has exceeded the trip point.     The code is logged.
The alarm output is activated.    
1358-3
Engine Cylinder #7 Knock Level : Voltage Above Normal     The Electronic Control Module (ECM) detects signal voltage that is not in the acceptable range.     The code is logged.
The alarm output is activated.    
1358-4
Engine Cylinder #7 Knock Level : Voltage Below Normal    
1358-19
Engine Cylinder #7 Knock Level : Data Error     The level of detonation has exceeded the trip point.     The code is logged.
The alarm output is activated.    
1359-3
Engine Cylinder #8 Knock Level : Voltage Above Normal     The Electronic Control Module (ECM) detects signal voltage that is not in the acceptable range.     The code is logged.
The alarm output is activated.    
1359-4
Engine Cylinder #8 Knock Level : Voltage Below Normal    
1359-19
Engine Cylinder #8 Knock Level : Data Error     The level of detonation has exceeded the trip point.     The code is logged.
The alarm output is activated.    
1360-3
Engine Cylinder #9 Knock Level : Voltage Above Normal     The Electronic Control Module (ECM) detects signal voltage that is not in the acceptable range.     The code is logged.
The alarm output is activated.    
1360-4
Engine Cylinder #9 Knock Level : Voltage Below Normal    
1360-19
Engine Cylinder #9 Knock Level : Data Error     The level of detonation has exceeded the trip point.     The code is logged.
The alarm output is activated.    
1361-3
Engine Cylinder #10 Knock Level : Voltage Above Normal     The Electronic Control Module (ECM) detects signal voltage that is not in the acceptable range.     The code is logged.
The alarm output is activated.    
1361-4
Engine Cylinder #10 Knock Level : Voltage Below Normal    
1361-19
Engine Cylinder #10 Knock Level : Data Error     The level of detonation has exceeded the trip point.     The code is logged.
The alarm output is activated.    
1362-3
Engine Cylinder #11 Knock Level : Voltage Above Normal     The Electronic Control Module (ECM) detects signal voltage that is not in the acceptable range.     The code is logged.
The alarm output is activated.    
1362-4
Engine Cylinder #11 Knock Level : Voltage Below Normal    
1362-19
Engine Cylinder #11 Knock Level : Data Error     The level of detonation has exceeded the trip point.     The code is logged.
The alarm output is activated.    
1363-3
Engine Cylinder #12 Knock Level : Voltage Above Normal     The Electronic Control Module (ECM) detects signal voltage that is not in the acceptable range.     The code is logged.
The alarm output is activated.    
1363-4
Engine Cylinder #12 Knock Level : Voltage Below Normal    
1363-19
Engine Cylinder #12 Knock Level : Data Error     The level of detonation has exceeded the trip point.     The code is logged.
The alarm output is activated.    Detonation sensors are located on the upper portion of the cylinder block between every two cylinders. Each sensor monitors the two adjacent cylinders. For example, one sensor monitors the detonation levels for cylinders 1 and 3.
Illustration 1 g03654881
Location of the detonation sensors (right side and left side engine views) (1) Detonation sensors for the cylinders that are on the right side of the engine (right side engine view) (2) Detonation sensors for the cylinders that are on the left side of the engine (left side engine view)The Integrated Sensing Module (ISM) supplies 8 VDC to each detonation sensor (1) and (2). The detonation sensors