842993 V-clamp Volvo.Penta
AD30A; AQAD30A; MD30A, AD31D; AD31D-A; AD31XD, AD31L-A; AD31P-A; AD41L-A, AD41D; D41D; TAMD41D, D4-180I-B; D4-180I-C; D4-180I-D, D5A-T; D5A-TA; D5A-B TA, KAD32P; TAMD42WJ-A; KAD43P-A, KAD42A; KAMD42A; HS1A, KAD42B; KAMD42B; TAMD42B, KAD42P-A; KAMD42P
V
Price: query
Rating:
You can buy parts:
As an associate, we earn commssions on qualifying purchases through the links below
FyJcBdd Exhaust Clamp for Vo-l-vo Penta 30 31 32 40 41 42 43 44 300 D4 21325765 842993 Parts
FyJcBdd Sophisticated production, provides excellent quality, stable performance. || Manufacturing ensuring maximum durability, not easy to damage, with good performance and long service life. || Installation and replacement method is simple. Wonderful replacement for the old or broken one, directly fitment. || Every product has quality inspection before leaving the factory. || Pictures are taken by the real product.
FyJcBdd Sophisticated production, provides excellent quality, stable performance. || Manufacturing ensuring maximum durability, not easy to damage, with good performance and long service life. || Installation and replacement method is simple. Wonderful replacement for the old or broken one, directly fitment. || Every product has quality inspection before leaving the factory. || Pictures are taken by the real product.
WgxzXyl 21325765 Exhaust Clamp for 30 31 32 40 41 42 43 44 300 D4 842993 Replace Parts
WgxzXyl
WgxzXyl
FVDLktL Exhaust Clamp Replacement Fit for Exhaust Elbow and Turbo D4 30 31 32 40 41 42 43 44 300 Motors 21325765 842993 Replacement Parts
FVDLktL Enhance the sealing of the exhaust system: ensure the exhaust system is tightly connected and improve engine performance. || High durability: adopt high temperature and corrosion resistant materials, adapt to the marine environment and extend service life. || Improve exhaust efficiency: optimize the exhaust pipe connection and improve the overall performance of the engine exhaust system. || Reduce air leakage problems: effectively prevent exhaust leakage and reduce the risk of engine failure. || Applicable to multiple models: compatible with multiple engine models of the D4 series, providing wide adaptability.
FVDLktL Enhance the sealing of the exhaust system: ensure the exhaust system is tightly connected and improve engine performance. || High durability: adopt high temperature and corrosion resistant materials, adapt to the marine environment and extend service life. || Improve exhaust efficiency: optimize the exhaust pipe connection and improve the overall performance of the engine exhaust system. || Reduce air leakage problems: effectively prevent exhaust leakage and reduce the risk of engine failure. || Applicable to multiple models: compatible with multiple engine models of the D4 series, providing wide adaptability.
Compatible models:
AD30A; AQAD30A; MD30A
AD31D; AD31D-A; AD31XD
AD31L-A; AD31P-A; AD41L-A
AD41D; D41D; TAMD41D
D4-180I-B; D4-180I-C; D4-180I-D
D5A-T; D5A-TA; D5A-B TA
KAD32P; TAMD42WJ-A; KAD43P-A
KAD42A; KAMD42A; HS1A
KAD42B; KAMD42B; TAMD42B
KAD42P-A; KAMD42P-A; HS1A
MD31A; TMD31A; TMD31B
MD31A; TMD31B; TAMD31B
MD40A; TMD40A; TMD40B
TMD41A; TMD41B; D41A
TMD41B; D41B; TAMD41B
Volvo.Penta
Volvo Penta entire parts catalog list:
- Induction- and Exhaust Manifold with Installation Components » 842993
- Induction- and Exhaust Manifold with Installation Components: A
- Induction- and Exhaust Manifold with Installation Components: B
- Dry Exhaust Line
AD31L-A; AD31P-A; AD41L-A; AD41P-A; D41L-A; TAMD31L-A; TAMD31M-A; TAMD31P-A; TAMD31S-A; TAMD41H-A; TAMD41H-B; TAMD41P-A; TAMD41L-A; TAMD41M-A
- Induction and Exhaust Manifold: A
- Induction and Exhaust Manifold: B
- Induction and Exhaust Manifold
- Induction and Exhaust Manifold
- Induction and Exhaust Manifold
- Induction and Exhaust Manifold
- Induction and Exhaust Manifold
- Dry Exhaust Line
- Dry Exhaust Line
- Induction and Exhaust Manifold: A
- Induction and Exhaust Manifold: B
- Induction and Exhaust Manifold: A
- Induction and Exhaust Manifold: B
- Dry Exhaust Line
- Dry Exhaust Line
- Turbo, Induction and Exhaust Manifold
- Turbo, Induction and Exhaust Manifold
- Turbo, Induction and Exhaust Manifold
- Exhaust Riser Kit, Inboard
- Exhaust Riser Kit, Inboard
- Exhaust Pipe Kit, AQ. SN-2004007439
- Exhaust Riser Kit, IPS
- Exhaust Pipe Kit for IPS
KAD32P; TAMD42WJ-A; KAD43P-A; KAMD43P; KAMD43P-A; KAMD43P-B; KAD44P; KAD44P-B; KAD44P-C; KAMD44P-A; KAMD44P-C; KAD300-A; KAMD300-A; HS1A; HS1E
- Induction and Exhaust Manifold
- Induction and Exhaust Manifold: A
- Induction and Exhaust Manifold: B
- Induction and Exhaust Manifold: C
- Induction and Exhaust Manifold: A
- Induction and Exhaust Manifold: B
- Induction and Exhaust Manifold: A
- Induction and Exhaust Manifold: B
- Inlet and Exhaust Manifold with Installation Components: A
- Inlet and Exhaust Manifold with Installation Components: B
- Induction and Exhaust Manifold: A
- Induction and Exhaust Manifold: B
- Induction and Exhaust Manifold: C
MD31A; TMD31A; TMD31B; TAMD31A; TAMD31B; AD31; AQAD31A; AD31B; 290A; DP-A; DP-B; DP-A1; DP-B1; SP-A; SP-A1
- Inlet and Exhaust Manifold and Installation Components
- Inlet and Exhaust Manifold and Installation Components: A
- Inlet and Exhaust Manifold and Installation Components: B
- Inlet and Exhaust Manifold and Installation Components: C
- Inlet and Exhaust Manifold and Installation Components
- Inlet and Exhaust Manifold and Installation Components
- Inlet and Exhaust Manifold and Installation Components: A
- Inlet and Exhaust Manifold and Installation Components: B
- Exhaust Bend for Dry Exhausts
- Exhaust Line, Dry
- Exhaust Line, Wet: 859268
- Exhaust Line, Wet: 859269
- Exhaust Line, Dry
- Inlet and Exhaust Manifold with Installation Components
- Inlet and Exhaust Manifold with Installation Components: A
- Inlet and Exhaust Manifold with Installation Components: B
- Exhaust Line, Dry
- Induction- and Exhaust Manifold with Installation Components
- Induction- and Exhaust Manifold with Installation Components
- Induction- and Exhaust Manifold and Cooling Water Overspill
- Dry Exhaust Line
- Inlet and Exhaust Manifold and Installation Components: A
- Inlet and Exhaust Manifold and Installation Components: B
- Inlet and Exhaust Manifold and Installation Components: A
- Inlet and Exhaust Manifold and Installation Components: B
- Inlet and Exhaust Manifold and Installation Components: A
- Inlet and Exhaust Manifold and Installation Components: B
- Inlet and Exhaust Manifold and Installation Components: C
- Inlet and Exhaust Manifold and Installation Components
- Inlet and Exhaust Manifold and Installation Components: A
- Inlet and Exhaust Manifold and Installation Components: B
- Exhaust Bend for Dry Exhausts
- Exhaust Line, Dry
- Exhaust Line, Wet: 859268
- Exhaust Line, Dry
Information:
3. Remove bolts (1) and plates from compressor housing.4. Remove the compressor housing. 5. Remove bolts (2) and locks from turbine housing.6. Remove cartridge (3) from turbine housing. 7. Install tool (B) in tool (C). Install cartridge in tool (C).8. Remove nut (4) from the compressor wheel.
When loosening the nut, do not put a side force on the shaft.
9. Install tool (D) on an oil heater. Heat the oil to 350°F (177°C). Install the cartridge on tool (D) with only the compressor wheel in the hot oil. Keep the compressor wheel in the hot oil for ten minutes. 10. Put tool (D) and cartridge on tool (E) under a press. Install driver (F) and push the shaft out of the compressor wheel. Step 10 must be done before the compressor wheel gets cold.11. Remove compressor wheel and shroud. Remove turbine wheel and shaft. 12. Remove the four bolts (5) and locks from plate (6). 13. Remove plate (6), spacer, collar and thrust bearing from cartridge.14. Remove seal from plate and ring from spacer. 15. Remove bearing (7), washer (11) and snap ring (8) from compressor side of cartridge.16. Remove snap ring (13), washer (10), bearing (12) and snap ring (9) from turbine side of cartridge.17. Inspect all parts and install new parts as needed.Assemble Turbocharger
1. Make sure all oil passages are open and clean. Put clean engine oil on all parts before assembly. 2. Install snap ring (6), bearing (3), washer (7) and snap ring (4) in turbine side of cartridge. Install the two snap rings with tool (A). Install the snap rings with the rounded edge toward the bearing.3. Install snap ring (2), washer (5) and bearing (1) in compressor side of cartridge. 4. Install seal (12) on plate (8) and ring (9) on spacer.5. Install collar (10) in plate and spacer (11) in collar. 6. Install thrust bearing (13) with the three radial grooves toward the outside.7. Install plate (8), bolts and locks. Tighten bolts to a torque of 35 5 lb.in. (40.4 5.8 cm.kg). 8. Install ring (14) on turbine wheel.9. Install turbine wheel and shaft in cartridge. Be careful not to break ring (14) when installing shaft. 10. Put cartridge on tool (C) and tool (C) on tool (B).11. Install the compressor wheel as follows: a) Heat the compressor wheel (15) in oil to 350°F (177°C) for ten minutes.b) Install the compressor wheel on the shaft and install the nut. Tighten the nut to a torque of 150 lb.in. (173 cm.kg). c) Let the compressor wheel cool and then remove the nut (16).d) Put clean engine oil on the threads of shaft. Install the nut and tighten to a torque of 30 lb.in. (34.6 cm.kg). Turn the nut 90° more. When tightening nut do not put a side force on shaft. 12. Install the cartridge in the turbine housing. Put 9M3710 Anti-Seize Compound on the bolts. Install the locks and bolts (17) in the turbine housing. Tighten the bolts to a torque of 175 15 lb.in. (201.8 17.3 cm.kg). 13. Install the compressor housing on the cartridge. Put 8S6747 Gasket Sealer on threads of bolts (18). Install the bolts in the compressor housing. Tighten bolt to a torque of 105 5 lb.in. (121.1 5.8 cm.kg).end by: a) install turbocharger
When loosening the nut, do not put a side force on the shaft.
9. Install tool (D) on an oil heater. Heat the oil to 350°F (177°C). Install the cartridge on tool (D) with only the compressor wheel in the hot oil. Keep the compressor wheel in the hot oil for ten minutes. 10. Put tool (D) and cartridge on tool (E) under a press. Install driver (F) and push the shaft out of the compressor wheel. Step 10 must be done before the compressor wheel gets cold.11. Remove compressor wheel and shroud. Remove turbine wheel and shaft. 12. Remove the four bolts (5) and locks from plate (6). 13. Remove plate (6), spacer, collar and thrust bearing from cartridge.14. Remove seal from plate and ring from spacer. 15. Remove bearing (7), washer (11) and snap ring (8) from compressor side of cartridge.16. Remove snap ring (13), washer (10), bearing (12) and snap ring (9) from turbine side of cartridge.17. Inspect all parts and install new parts as needed.Assemble Turbocharger
1. Make sure all oil passages are open and clean. Put clean engine oil on all parts before assembly. 2. Install snap ring (6), bearing (3), washer (7) and snap ring (4) in turbine side of cartridge. Install the two snap rings with tool (A). Install the snap rings with the rounded edge toward the bearing.3. Install snap ring (2), washer (5) and bearing (1) in compressor side of cartridge. 4. Install seal (12) on plate (8) and ring (9) on spacer.5. Install collar (10) in plate and spacer (11) in collar. 6. Install thrust bearing (13) with the three radial grooves toward the outside.7. Install plate (8), bolts and locks. Tighten bolts to a torque of 35 5 lb.in. (40.4 5.8 cm.kg). 8. Install ring (14) on turbine wheel.9. Install turbine wheel and shaft in cartridge. Be careful not to break ring (14) when installing shaft. 10. Put cartridge on tool (C) and tool (C) on tool (B).11. Install the compressor wheel as follows: a) Heat the compressor wheel (15) in oil to 350°F (177°C) for ten minutes.b) Install the compressor wheel on the shaft and install the nut. Tighten the nut to a torque of 150 lb.in. (173 cm.kg). c) Let the compressor wheel cool and then remove the nut (16).d) Put clean engine oil on the threads of shaft. Install the nut and tighten to a torque of 30 lb.in. (34.6 cm.kg). Turn the nut 90° more. When tightening nut do not put a side force on shaft. 12. Install the cartridge in the turbine housing. Put 9M3710 Anti-Seize Compound on the bolts. Install the locks and bolts (17) in the turbine housing. Tighten the bolts to a torque of 175 15 lb.in. (201.8 17.3 cm.kg). 13. Install the compressor housing on the cartridge. Put 8S6747 Gasket Sealer on threads of bolts (18). Install the bolts in the compressor housing. Tighten bolt to a torque of 105 5 lb.in. (121.1 5.8 cm.kg).end by: a) install turbocharger
Parts v Volvo Penta:
958359
958359 V-belt
AD30A; AQAD30A; MD30A, AQD70D; TAMD70D; TAMD70E, MD100A; TMD100A; TMD100AK, MD120A; MD120AK; TMD120A, MD40A; TMD40A; TMD40B, MD70B; MD70BK; TMD70B, MD70C; TMD70C; TAMD70C, TD30A; TD31ACE; TD40A
1219961
1219961 V-belt pulley
430; 430A; 430B, 500; 500A; 501A, 571A, 740A; BB740A, AD30A; AQAD30A; MD30A, AD31D; AD31D-A; AD31XD, AD31L-A; AD31P-A; AD41L-A, AD41D; D41D; TAMD41D, AQ205A; AQ205LB, AQ211A; DP-A; SP-A, AQ231A; AQ231B; AQ231LB, AQ271A; AQ271B; AQ271C, AQ311A; AQ311B
958539
958539 V-belt
AD30A; AQAD30A; MD30A, MD31A; TMD31A; TMD31B, MD40A; TMD40A; TMD40B, TAMD60A; TAMD60B, TAMD60C, TD70G; TD70G-83; TD70GPP, TMD41A; TMD41B; D41A
991590
991587
991591
991591 V-ribbed belt, power steering pump
D4-180I-B; D4-180I-C; D4-180I-D, D4-180I-F; D4-225A-F; D4-225I-F
21407028
21407028 V-ribbed belt
D4-180I-B; D4-180I-C; D4-180I-D, D4-180I-F; D4-225A-F; D4-225I-F, D6-280A-A; D6-280A-B; D6-280A-C, D6-300A-F; D6-300D-F; D6-300I-F
973487
973487 V-belt
KAD32P; TAMD42WJ-A; KAD43P-A, KAD42A; KAMD42A; HS1A, KAD42B; KAMD42B; TAMD42B, KAD42P-A; KAMD42P-A; HS1A