Parts on group OIL PAN, OIL PUMP AND REAR OIL SEAL:
Pos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
-. | 824326A01 | [1] | GASKET SET, Engine Overhaul | |
-. | 864256A 1 | [1] | LONGBLOCK (4.3L) | |
1. | 809907 1 | [1] | PUMP ASSEMBLY, Oil | |
10. | 14247T 1 | [1] | GASKET SET, Oil Pan | |
11. | 49955 | [2] | GASKET, Drain Screw | |
12. | 862812A 1 | [1] | FITTING, Female Quick Connect | (Design I-With Quick Connect Hose Assembly) SN# 0M642973 & Below |
12. | 862813 | [1] | FITTING, Tee | (Design II-Without Quick Connect Hose Assembly) SN# 0M642974 & Up |
13. | 72607 1 | [10] | SCREW, (.250-20 x .625) | |
14. | 11989 | [2] | STUD, (.312-18 x 1.6718) | |
15. | 14257 | [1] | REINFORCEMENT | (Port) |
16. | 14256 | [1] | REINFORCEMENT | (Starboard) |
17. | 11971 | [4] | NUT, (.312-18) | |
18. | 865021A 1 | [1] | TUBE, Dipstick-Standard Cooling | SN# 0M639999 & Below |
18. | 865178 | [1] | TUBE, Dipstick-Standard Cooling | SN# 0M640000 & Up |
18. | 864928A 1 | [1] | TUBE, Closed Cooling | SN# 0W000001 & Up |
19. | 861942 15 | [1] | DIPSTICK, Standard Cooling | SN# 0M639999 & Below |
19. | 861942 16 | [1] | DIPSTICK, Standard Cooling | SN# 0M640000 & Up |
19. | 861942 14 | [1] | DIPSTICK, Closed Cooling | SN# 0W000001 & Up |
2. | 17346 | [1] | SCREW, Oil Pump | |
20. | 805444 | [1] | CLIP, Dipsitck Tube | |
21. | 35366 | [1] | SCREW, (.250-20 x .563) | |
22. | 805505A 4 | [1] | HOSE, Oil Drain | (Design I-With Quick Connect Hose Assembly) SN# 0M642973 & Below |
22. | 865278 | [1] | HOSE, Oil Drain | (Design II-Without Quick Connect Hose Assembly) SN# 0M642974 & Up |
22. | 865279 | [1] | HOSE, Oil Drain (Jackshaft Models) | (Design II-Without Quick Connect Hose Assembly) SN# 0M642775 & Up |
23. | 863481 | [1] | CLAMP, Ty Strap | |
24. | 862777 | [1] | FLANGE, Drain | |
25. | 862827 | [1] | TETHER ASSEMBLY | |
26. | 805524 | [1] | CLIP | |
27. | 43504 | [1] | PIN, Dowel, Flywheel Housing Location | |
28. | 34270 | [8] | EXPANSION PLUG, (1.625), Engine Core Hole | |
29. | 48358 | [3] | PLUG, (.375), Oil Galley | |
3. | 809908 1 | [1] | SCREEN, Oil Pump Pick-Up | |
30. | 72640 | [1] | PLUG, Expansion, Camshaft Bearing Hole | |
31. | 14827 1 | [2] | STUD | |
32. | 881715 | [1] | GASKET, Crankshaft Oil Seal Housing | |
33. | 804910 | [1] | RETAINER, Crankshaft Oil Seal | |
34. | 804909 | [1] | SEAL, Crankshaft Oil | |
35. | 11989 | [2] | STUD, (.312-18 x 1.6718) | |
36. | 816730 1 | [1] | NUT | |
37. | 14242 | [2] | BOLT, (.250-20 x .875) | |
38. | 14243 | [1] | BOLT, (.250-20 x 1.750) | |
39. | 11971 | [2] | NUT, (.312-18) | |
4. | 36184 | [1] | SHAFT | |
40. | 14263 | [1] | PIN, Dowel, Dowel - Oil Seal Housing Location | |
5. | 36183 | [1] | RETAINER | |
6. | 98602 1 | [1] | DEFLECTOR, Oil | |
7. | 35312 | [1] | PIN, Dowel, Alignment,Oil Pump | |
8. | 845602 | [5] | NUT, (.375-16) | |
9. | 804912 | [1] | OIL PAN |