Parts on group GIMBAL HOUSING:
Pos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
-. | 88847A 1 | [1] | PLUG KIT, Access Hole | (Contains All Necessary Parts To Allow Removal Of Swivel Shaft With Out Removing Gimbal Housing) |
1. | 43881A11 | [1] | GIMBAL HOUSING ASSEMBLY | |
10. | 61075 | [1] | TOLERANCE RING | |
11. | 41802 | [1] | SEAL, Rubber, Exhaust Pipe | |
12. | 56766 | [2] | STUD, (.250-20/.250-28 x 1.380) | |
13. | 43713 | [1] | SEAL | |
14. | 73379 | [1] | PLUG, (.250-18) | |
15. | 41672 1 | [1] | TUBE, Water | |
16. | 816599 | [1] | BUSHING | |
17. | 41673 | [1] | COVER | |
18. | 28636 | [2] | SCREW, (.250-20 x .750) | |
19. | 99353 | [1] | SWIVEL PIN, Lower, Lower | |
2. | 56296 | [6] | STUD, (.437-20 x 4.750) | |
20. | 54929 | [1] | COTTER PIN | |
21. | 32518 | [1] | WASHER | |
22. | 43691 | [2] | BOLT, (.500-13 x 4.00) | (Old Design) |
23. | 32620 | [2] | WASHER | (Old Design) |
24. | 21900 | [2] | WASHER | (Old Design) |
25. | 34087 | [2] | NUT | (Old Design) |
26. | 74639A 2 | [1] | BELLOWS ASSEMBLY | |
27. | 38863 | [1] | CLAMP | |
28. | 815504320 | [1] | CLAMP, Worm Gear | |
29. | 34567 | [6] | WASHER | |
2A. | 818834 | [2] | STUD, (.437-20 x 4.250), New Design | |
3. | 98357 1 | [1] | BUSHING, Lower | |
30. | 34933 | [6] | NUT, (.437-20) Stainless Steel | |
31. | 98823 1 | [1] | GASKET | |
32. | 98825A 4 | [1] | MANIFOLD ASSEMBLY | |
33. | 78968 | [2] | LOCKWASHER, Internal (.250) | |
34. | 13438 | [2] | NUT, (.250-28) | |
35. | 821631A 1 | [1] | ANODE ASSEMBLY | |
36. | 12077 | [1] | SEAL | |
37. | 99506 1 | [1] | GASKET | |
38. | 86885 | [2] | SCREW, (.250-20 x 1.500) Stainless Steel | |
39. | 78968 | [2] | LOCKWASHER, Internal (.250) | |
4. | 41607 1 | [1] | SEAL, Oil | |
5. | 98356 | [1] | BUSHING, Upper | |
6. | 74036 | [1] | FITTING, Grease | (Use with greased bearing) |
6. | 8M2015913 | [1] | PLUG, (.250-28 x .320) | (Use with non-greased bearing) |
7. | 77633 | [1] | LUBRICAP | |
8. | 88416 | [1] | SEAL, Oil | |
9. | 60794A 4 | [1] | BEARING ASSEMBLY |