1041312UB, 1041312UD
ELO
1998
Parts on group GEAR HOUSING (PROPELLER SHAFT)(1.83:1 GEAR RATIO):
Pos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
-. | 821306A26 | [1] | GEAR HOUSING | (BLACK) SHORT |
-. | 821306A27 | [1] | GEAR HOUSING | (GRAY) SHORT |
-. | 821306A28 | [1] | GEAR HOUSING | (BLACK) LONG |
-. | 821306A29 | [1] | GEAR HOUSING | (GRAY) LONG |
-. | 828553A97 | [1] | GASKET SET | |
-. | 823547A 2 | [1] | SEAL KIT | |
1. | 821306A12 | [1] | GEAR HOUSING | (BASIC-BLACK) |
1. | 821306A13 | [1] | GEAR HOUSING | (BASIC-GRAY) |
40. | 821327 | [2] | DOWEL PIN | |
41. | 823942 | [1] | GASKET WATER TUBE | |
42. | 821828 | [1] | TUBE | |
43. | 824928 | [1] | PLUG-RUBBER | |
44. | 821829 | [1] | SCREEN-WATER INLET | |
45. | 822157C 2 | [1] | TRIM TAB | |
46. | 824970 20 | [1] | SCREW (M8 X 20) | |
47. | 72397 | [1] | WASHER | |
48. | 822162A 2 | [1] | FORWARD GEAR ASSEMBLY (22 TEETH) | |
49. | 99328A 1 | [1] | ROLLER BEARING ASSEMBLY | |
50. | NSS | [1] | CUP | |
51. | 41326 | [1] | ROLLER BEARING | |
52. | 821578 | [1] | FOLLOWER-CAM | |
53. | 826199 1 | [1] | SPRING | |
54. | 85093 | [1] | PIN-CROSS | |
55. | 821314 | [1] | CLUTCH | |
56. | 38114 | [1] | SPRING | |
57. | 821577 2 | [1] | PROPELLER SHAFT | |
58. | 822163 | [1] | REVERSE GEAR (22 TEETH) | |
59. | 20839 | [1] | BALL BEARING | |
60. | 19291A 3 | [1] | BEARING CARRIER | |
61. | 815460 | [1] | O RING | |
62. | 21700 | [1] | NEEDLE BEARING | |
63. | 69188 | [1] | OIL SEAL | |
64. | 69189 | [1] | OIL SEAL | |
65. | 70132 | [2] | WASHER | |
65. | 855941 | [2] | WASHER | (USE WITH THREADED INSERT) |
66. | 40003 53 | [2] | SCREW (M8 X 25 - CAP SCREW) | |
66. | 855940 30 | [2] | SCREW | (USE WITH THREADED INSERT) |
67. | 822773 1 | [2] | THREADED INSERT | |
68. | NSS | [1] | DECAL 1.83:1 (12 X 22) | |
69. | 73345A 1 | [1] | THRUST HUB | |
70. | 69578A 1 | [1] | PROP NUT | |
71. | 76281 | [1] | TAB WASHER | |
72. | 40003 80 | [4] | SCREW | |
73. | 45176 | [4] | WASHER |