56100-ZY6-003 Honda PUMP ASSY.

12Jul2011
U-279
A-231
D-253
O-244
TM-17
Parts stock action only
PRODUCT IMPROVEMENT PROGRAM TO REMOVE AND INSPECT CERTAIN REMANUFACTURED CYLINDER PACKS AND CONNECTING RODS FOR 3500 HIGH DISPLACEMENT ENGINES FROM DEALER PARTS STOCK
7750 PI70395
When submitting claim for Parts Stock Action, Use the appropriate 99Z as the s/n, the appropriate Service Letter Program Number as the Part number in the Part Causing Failure field, "7751" as the Group Number, "56" as the Description Code.
The information supplied in this service letter may not be valid after the termination date of this program.Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
TERMINATION DATE
31Oct2011
PROBLEM
Edges of the oil hole in the crank and pin bores of the rod are deburred during the machining of the rod prior to the installation of the pin bushing. In some cases, burrs have not been completely removed from the edges of the hole and those burrs can break loose during engine operation causing rod bearing damage or failure. In other cases, the rigid edge of the oil hole damages the pin bushing when inserted and creates debris in the hole.
ACTION REQUIRED
1. Inspect the package date code label on the outside of the box of all 10R4029, 10R9224, 10R9258 and 10R9257 cylinder packs and 230-2516 and 10R4030 connecting rods in dealer parts stock. The first nine characters of the date code indicate the Day, Month, and Year. Determine if the date code is prior to M03D30Y11 (March 30, 2011).
- If the date code on the package IS prior to M03D30Y11 (March 30, 2011), proceed to Step 2.
- If the date code on the package IS NOT prior to M03D30Y11 (March 30, 2011), mark the outside of the package to indicate it has been inspected according to this program, PI7####, and return to dealer parts stock. No further action is required, the part may be used "as-is".
2. Dealers with ability to inspect the inventory with a boroscope that has a 4.7mm lens (or comparable) through the oil passage, proceed to Step 3.
Dealers without the ability to inspect the inventory with a boroscope that has a 4.7mm lens (or comparable) to fit through the oil passage, remove the part from dealer parts stock.
3. Inspect cylinder packs and connecting rods with a boroscope with a 4.7mm lens (or comparable) to fit through the oil passage. Image1 shows a boroscope view of the debris in the hole. Image2 illustrates a rod being inspected with a rigid lense. Flexible lenses also can be used.
-If no debris is present at the top of the oil passage, the part is acceptable to use. Mark the outside of the package to indicate the part has been inspected according to this program, PI7####, and return to dealer parts stock.
-If debris is present at the top of the oil passage, remove the part from dealer parts stock.
Image1
Image2
SERVICE CLAIM ALLOWANCES
Submit one claim for inventory inspection for the affected date codes for the cylinder packs and connecting rods.1.0 hour will be allowed for each cylinder pack or connecting rod that was inspected with a boroscope for the debris.
PARTS DISPOSITION
***** NACD *****
Hold all 10R4029, 10R9224, 10R9258 and 10R9257 cylinder packs and 230-2516 and 10R4030 connecting rods with a date code prior to M03D30Y11 (March 30, 2011) for a Parts Return Request (PRR). A Parts Return Request (PRR) will be issued to you through the Send-It-Back process after the claim is submitted. Make sure to list the service letter program number on the packing slip and include the closed work order paperwork.
***** EAME, LACD, and APD *****
Hold all 10R4029, 10R9224, 10R9258 and 10R9257 cylinder packs and 230-2516 and 10R4030 connecting rods with a date code prior to M03D30Y11 (March 30, 2011) for 30 days for a possible Parts Return Request (PRR). When returning the part, please label it with a blue warranty tag. Make sure to list the service letter program number on the packing slip and include the closed work order paperwork.
If a Parts Return Request (PRR) is not issued to you after 30 days through the Send-It-Back process, handle the parts in accordance with your warranty bulletin on warranty parts handling.